top of page
此網站是使用
.com
網站幫手設計的。立即用來製作您的網站吧！立即開始

International Conference Papers

  1.  

  2.  

  3.  

  4.  

  5.  

  6.  

  7.  

  8.  

  9.  

  10.  

  11.  

  12.  

  13.  

  14.  

  15.  

  16.  

  17.  

  18.  

  19.  

  20.  

  21.  

  22.  

  23.  

  24.  

  25.  

  26.  

  27.  

  28.  

  29.  

  30.  

  31.  

  32.  

  33.  

  34.  

  35.  

  36.  

  37.  

  38.  

  39.  

  40.  

  41.  

  42.  

  43.  

  44.  

  45.  

  46.  

  47.  

  48.  

  49.  

  50.  

  51.  

  52.  

  53.  

  54.  

  55.  

  56.  

  57.  

  58.  

  59.  

  60.  

  61.  

  62.  

  63.  

  64.  

  65.  

  66.  

  67.  

  68.  

  69.  

  70.  

  71.  

  72.  

  73.  

  74.  

  75.  

  76.  

  77.  

  78.  

  79.  

  80.  

  81.  

  82.  

  83.  

  84.  

  85.  

  86.  

  87.  

  88.  

  89.  

  90.  

  91.  

  92.  

  93.  

  94.  

  95.  

  96.  

  97.  

  98.  

  99.  

  100.  

  101.  

  102.  

  103.  

  104.  

  105.  

  106.  

  107.  

  108.  

  109.  

  110.  

  111.  

  112.  

  113.  

  114.  

  115.  

  116.  

  117.  

  118.  

  119.  

  120.  

  121.  

  122.  

  123.  

  124.  

  125.  

  126.  

  127.  

  128.  

  129.  

  130.  

  131.  

  132.  

  133.  

  134.  

  135.  

  136.  

  137.  

  138.  

  139.  

  140.  

  141.  

  142.  

  143.  

  144.  

  145.  

  146.  

  147.  

  148.  

  149.  

  150. ​

  151. Zhou, H.F., Ni, Y.Q., Liao, W.Y., Tam, H.Y., and Liu, S.Y. (2009), “Structural health monitoring system for steel antenna mast of Guangzhou Television and Sightseeing Tower”, Proceedings of the 6th International Conference on Advances in Steel Structures, S.L. Chan (ed.), The Hong Kong Institute of Steel Construction, Hong Kong, Vol. II, 702-707 (16-18 December 2009, Hong Kong).

  152. Ye, X.W., Ni, Y.Q., and Ko, J.M. (2009), “SHM-based fatigue reliability evaluation of steel bridges: methodology, experiment, and application”, Proceedings of the 6th International Conference on Advances in Steel Structures, S.L. Chan (ed.), The Hong Kong Institute of Steel Construction, Hong Kong, Vol. I, 377-386 (16-18 December 2009, Hong Kong).

  153. Ni, Y.Q. (2009), “Monitoring-based fatigue reliability assessment of steel bridges: analysis, experiment, and application”, Invited Speech, Proceedings of the 6th Workshop on Nondestructive Evaluation of Civil Infrastructural System, 29-30 October 2009, Taipei, Taiwan, 157-171.

  154. Ni, Y.Q., Ying, Z.G., and Chen, Z.H. (2009), “Micro-vibration suppression of equipment supported on a sandwich beam incorporating magneto-rheological elastomer (MRE) core”, Invited Speech, Environmental Vibrations: Prediction, Monitoring, Mitigation and Evaluation, H. Xia, and H. Takemiya (eds.), Science Press, Beijing, China, 203-209 (Proceedings of the 4th International Symposium on Environmental Vibrations: Prediction, Monitoring, Mitigation and Evaluation, 28-30 October 2009, Beijing, China).

  155. Chen, Z.H., and Ni, Y.Q. (2009), “Identification and online experimental verification of an MR damper incorporated with structure”, Proceedings of the 20th International Conference on Adaptive Structures and Technologies, 20-22 October 2009, Hong Kong (CD-ROM).

  156. Qian, Y.Y., Ni, Y.Q., and Wong, K.Y. (2009), “Performance-based design of structural health monitoring systems”, Safety, Reliability and Risk of Structures, Infrastructures and Engineering Systems, H. Furuta, D.M. Frangopol, and M. Shinozuka (eds.), Taylor & Francis, London, UK, 2134-2140 (CD-ROM) (Proceedings of the 10th International Conference on Structural Safety and Reliability, 13-17 September 2009, Osaka, Japan).

  157. Ni, Y.Q., Xia, H.W., Ko, J.M., and Wong, K.Y. (2009), “Probability-based structural assessment of Tsing Ma Bridge deck sections using in-service monitoring data”, Safety, Reliability and Risk of Structures, Infrastructures and Engineering Systems, H. Furuta, D.M. Frangopol, and M. Shinozuka (eds.), Taylor & Francis, London, UK, 2568-2574 (CD-ROM) (Proceedings of the 10th International Conference on Structural Safety and Reliability, 13-17 September 2009, Osaka, Japan).

  158. Guo, Y.L., Ni, Y.Q., Chen, S.K., and Zhou, H.F. (2009), “Optimal sensor layout for bridges subject to ship collision”, Sustainable Infrastructure: Environment Friendly, Safe and Resource Efficient · Proceedings of the 33rd IABSE Symposium, 9-11 September 2009, Bangkok, Thailand (CD-ROM). (DOI)

  159. Guo, Y.L., Ni, Y.Q., Ko, J.M., and Hua, X.G. (2009), “Optimal sensor placement on cables of cable-stayed bridges for structural damage evaluation”, Structural Health Monitoring 2009: From System Integration to Autonomous Systems, F.-K. Chang (ed.), DEStech Publications, Lancaster, Pennsylvania, USA, 2131-2138 (Proceedings of the 7th International Workshop on Structural Health Monitoring, 9-11 September 2009, Stanford, California, USA).

  160. Ni, Y.Q., and Wong, K.Y. (2009), “Health checks through landmark bridges to sky-high structures”, Proceedings of the 5th International Workshop on Advanced Smart Materials and Smart Structures Technology, M.L. Wang, B.F. Spencer, Jr., and Y. Cao (eds.), Techno-Press, Daejeon, Korea, 9-22 (29-31 July 2009, Boston, Massachusetts, USA).

  161. Xia, Y., Ni, Y.Q., Ko, J.M., Liao, W.Y., and Chen, W.H. (2009), “ANCRiSST benchmark problem on structural health monitoring of high-rise slender structures  Phase I: field vibration measurement”, Proceedings of the 5th International Workshop on Advanced Smart Materials and Smart Structures Technology, M.L. Wang, B.F. Spencer, Jr., and Y. Cao (eds.), Techno-Press, Daejeon, Korea, 42-49 (29-31 July 2009, Boston, Massachusetts, USA).

  162. Ni, Y.Q., Xia, Y., Lin, W., Chen, W.H., and Ko, J.M. (2009), “ANCRiSST benchmark problem on structural health monitoring of high-rise slender structures Phase I: reduced-order finite element model”, Proceedings of the 5th International Workshop on Advanced Smart Materials and Smart Structures Technology, M.L. Wang, B.F. Spencer, Jr., and Y. Cao (eds.), Techno-Press, Daejeon, Korea, 50-56 (29-31 July 2009, Boston, Massachusetts, USA).

  163. Guo, Y.L., Ni, Y.Q., and Zhou, H.F. (2009), “Condition assessment of post-ship-collision bridges using HHT analysis”, Proceedings of the 5th International Workshop on Advanced Smart Materials and Smart Structures Technology, M.L. Wang, B.F. Spencer, Jr., and Y. Cao (eds.), Techno-Press, Daejeon, Korea, 57-64 (29-31 July 2009, Boston, Massachusetts, USA).

  164. Chen, Z.H., Ni, Y.Q., Lam, K.H., and Or, S.W. (2009), “Nonlinear neural emulation of forward and inverse dynamics for a self-sensing magneto-rheological damper”, Proceedings of the 5th International Workshop on Advanced Smart Materials and Smart Structures Technology, M.L. Wang, B.F. Spencer, Jr., and Y. Cao (eds.), Techno-Press, Daejeon, Korea, 556-563 (29-31 July 2009, Boston, Massachusetts, USA).

  165. Xia, Y., Ni, Y.Q., Zhang, P., Liao, W.Y., and Ko, J.M. (2009), “Strain/stress monitoring and analysis of Guangzhou New TV Tower during construction”, Proceedings of the 4th International Conference on Structural Health Monitoring and Intelligent Infrastructure, 22-24 July 2009, Zurich, Switzerland (CD-ROM). (DOI)

  166. Ni, Y.Q., Xia, Y., Chen, W.H., Lu, Z.R., Liao, W.Y., and Ko, J.M. (2009), “Monitoring of wind properties and dynamic responses of a supertall structure during typhoon periods”, Proceedings of the 4th International Conference on Structural Health Monitoring and Intelligent Infrastructure, 22-24 July 2009, Zurich, Switzerland (CD-ROM).

  167. Chen, Z.H., Ni, Y.Q., Lam, K.H., and Or, S.W. (2009), “Modelling of a self-sensing magnetorheological damper using Bayesian regularized NARX neural network”, Proceedings of the 1st International Postgraduate Conference on Infrastructure and Environment, 5-6 June 2009, Hong Kong, 575-582. (DOI)

  168. Guo, Y.L., Ni, Y.Q., and Chen, S.K. (2009), “Sensor placement optimization for damage evaluation of bridges subject to ship collision”, Proceedings of the 1st International Postgraduate Conference on Infrastructure and Environment, 5-6 June 2009, Hong Kong, 543-550.

  169. Ni, Y.Q., Zhang, P., Ye, X.W., Lin, K.C., and Liao, W.Y. (2009), “Temperature-induced deformations of reinforced concrete core of a supertall structure: integrating field monitoring data into finite element analysis”, Proceedings of the 1st International Conference on Computational Technologies in Concrete Structures, 24-27 May 2009, Jeju, Korea, 327-339.

  170. Ni, Y.Q., Xia, Y., Lu, Z.R., and Tam, H.Y. (2008), “Technological issues in developing structural health monitoring for a supertall structure”, Proceedings of the 3rd World Congress on Engineering Asset Management and Intelligent Maintenance Systems, 27-30 October 2008, Beijing, China, 1199-1207. (DOI)

  171. Xia, Y., Ni, Y.Q., Ko, J.M., Liao, W.Y., and Chen, H.B. (2008), “The SHM system of Guangzhou New TV Tower and the benchmark problem for SHM of high-rise structures”, Proceedings of the 10th International Symposium on Structural Engineering for Young Experts, B. Xu, Y. Xiao, J.P. Ru and W.X. Ren (eds.), Science Press, Beijing, China, 1255-1260 (19-21 October 2008, Changsha, China). (DOI)

  172. Liao, W.Y., Chen, W.H., Ni, Y.Q., and Ko, J.M. (2008), “Post-earthquake damage identification of tall building structures: experimental verification”, Proceedings of the 14th World Conference on Earthquake Engineering, 12-17 October 2008, Beijing, China (CD-ROM). (DOI)

  173. Ni, Y.Q., Xia, Y., Liao, W.Y., and Zhang, P. (2008), “Long-term structural health monitoring of a supertall TV tower”, Proceedings of the 4th European Workshop on Structural Health Monitoring, T. Uhl, W. Ostachowicz and J. Holnicki-Szulc (eds.), DEStech Publications, Lancaster, Pennsylvania, USA, 251-258 (2-4 July 2008, Cracow, Poland). (DOI)

  174. Xia, Y., Ni, Y.Q., Ko, J.M., and Chen, H.B. (2008), “ANCRiSST benchmark problem on structural health monitoring of high-rise slender structures”, Proceedings of the 4th International Workshop on Advanced Smart Materials and Smart Structures Technologies, 24-25 June 2008, Tokyo, Japan, 103-108.

  175. Ni, Y.Q., Xia, Y., Zhang, P., and Liao, W.Y. (2008), “Structural health monitoring for Guangzhou New TV Tower: design and implementation”, Proceedings of the 4th International Workshop on Advanced Smart Materials and Smart Structures Technologies, 24-25 June 2008, Tokyo, Japan, 91-96.

  176. Ni, Y.Q., Xia, Y., Liao, W.Y., and Ko, J.M. (2008), “Technology innovation in developing the structural health monitoring system for Guangzhou New TV Tower”, Proceedings of the International Symposium on Structural Control and Health Monitoring, 10-11 January 2008, Taichung, Taiwan, X1-X26.

  177. Zhou, H.F., Ni, Y.Q., and Ko, J.M. (2008), “A data processing and analysis system for the instrumented suspension Jiangyin Bridge”, World Forum on Smart Materials and Smart Structures Technology, B.F. Spencer, Jr., M. Tomizuka, C.B. Yun, W.M. Chen, and R.W. Chen (eds.), Taylor & Francis, London, UK (CD-ROM) (Proceedings of the World Forum on Smart Materials and Smart Structures Technology, 22-27 May 2007, Chongqing and Nanjing, China).

  178. Wang, X.Y., Chen, Z.Q., Ni, Y.Q., and Ko, J.M. (2008), “Design approaches of mitigating cable vibration using MR dampers on the cable-stayed bridges”, World Forum on Smart Materials and Smart Structures Technology, B.F. Spencer, Jr., M. Tomizuka, C.B. Yun, W.M. Chen, and R.W. Chen (eds.), Taylor & Francis, London, UK (CD-ROM) (Proceedings of the World Forum on Smart Materials and Smart Structures Technology, 22-27 May 2007, Chongqing and Nanjing, China).

  179. Ni, Y.Q., Hua, X.G., Chen, K.W., and Ko, J.M. (2008), “Estimation of probability density function of long-term strain measurement for reliability assessment”, World Forum on Smart Materials and Smart Structures Technology, B.F. Spencer, Jr., M. Tomizuka, C.B. Yun, W.M. Chen, and R.W. Chen (eds.), Taylor & Francis, London, UK (CD-ROM) (Proceedings of the World Forum on Smart Materials and Smart Structures Technology, 22-27 May 2007, Chongqing and Nanjing, China).

  180. Liao, W.Y., Ni, Y.Q., and Ko, J.M. (2008), “Cable force identification by global optimization using coupled local minimizers”, World Forum on Smart Materials and Smart Structures Technology, B.F. Spencer, Jr., M. Tomizuka, C.B. Yun, W.M. Chen, and R.W. Chen (eds.), Taylor & Francis, London, UK (CD-ROM) (Proceedings of the World Forum on Smart Materials and Smart Structures Technology, 22-27 May 2007, Chongqing and Nanjing, China).

  181. Chen, Z.H., Ni, Y.Q., Or, S.W., and Lam, K.H. (2008), “A tailor-made MR damper for bridge cable vibration control: experiment and modelling”, World Forum on Smart Materials and Smart Structures Technology, B.F. Spencer, Jr., M. Tomizuka, C.B. Yun, W.M. Chen, and R.W. Chen (eds.), Taylor & Francis, London, UK (CD-ROM) (Proceedings of the World Forum on Smart Materials and Smart Structures Technology, 22-27 May 2007, Chongqing and Nanjing, China).

  182. Ni, Y.Q., Ying, Z.G., and Chen, Z.H. (2007), “Parametric oscillation of cables in cable-stayed bridges under deck-motion excitations”, Proceedings of the 3rd International Symposium on Environmental Vibrations: Prediction, Monitoring, Mitigation and Evaluation, Taipei, Taiwan, 617-624.

  183. Ye, X.W., Ni, Y.Q., and Ko, J.M. (2007), “Hot spot stress approach for fatigue life assessment in welded bridge connections using monitoring data and FEM analysis”, Proceedings of the 3rd International Conference on Structural Health Monitoring and Intelligent Infrastructure, 13-16 November 2007, Vancouver, Canada (CD-ROM).

  184. Lam, K.H., Chen, Z.H., Or, S.W., Ni, Y.Q., and Chan, H.L.W. (2007), “Smart magnetorheological dampers with embedded sensors for vibration control applications”, Proceedings of the 3rd International Conference on Structural Health Monitoring and Intelligent Infrastructure, 13-16 November 2007, Vancouver, Canada (CD-ROM).

  185. Zhou, H.F., Ni, Y.Q., and Ko, J.M. (2007), “Eliminating temperature effect in structural damage alarming using auto-associative neural networks”, Structural Health Monitoring 2007: Quantification, Validation, and Implementation, F.-K. Chang (ed.), DEStech Publications, Lancaster, Pennsylvania, USA, 539-548.

  186. Duan, Y.F., Ni, Y.Q., and Ko, J.M. (2007), “Preliminary design of magneto-rheological (MR) dampers for vibration control of stay cables on cable-stayed Sutong Bridge”, Proceedings of the 4th Cross-Strait Conference on Structural and Geotechnical Engineering, 24-26 April 2007, Hangzhou, China, 844-856.

  187. Ye, X.W., Ni, Y.Q., and Ko, J.M. (2007), “Monitoring-based fatigue life assessment of a suspension bridge accounting for both traffic and typhoon effects”, Proceedings of the 4th Cross-Strait Conference on Structural and Geotechnical Engineering, 24-26 April 2007, Hangzhou, China, 832-843.

  188. Zhou, H.F., Ni, Y.Q., and Ko, J.M. (2007), “Eliminating environmental effects in vibration-based structural damage detection”, Proceedings of the 4th Cross-Strait Conference on Structural and Geotechnical Engineering, 24-26 April 2007, Hangzhou, China, 397-410.

  189. Ni, Y.Q., and Ko, J.M. (2006), “Structural health monitoring and condition assessment of cable-supported bridges”, Proceedings of the International Workshop on Structural Health Monitoring and Damage Assessment, National Chung-Hsing University, Taichung, Taiwan, V1-V18.

  190. Zhou, H.F., Chan, T.K., Wang, J.Y., and Ni, Y.Q. (2006), “A structural health monitoring data management system for instrumented cable-supported bridges”, Proceedings of the Asia-Pacific Workshop on Structural Health Monitoring, 4-6 December 2006, Yokohama, Japan, 514-522 (CD-ROM).

  191. Ni, Y.Q., Wat, K.F., Ko, J.M., and Hua, X.G. (2006), “Damage evaluation of truss bridges using a reliability-based assessment technique”, Proceedings of the Asia-Pacific Workshop on Structural Health Monitoring, 4-6 December 2006, Yokohama, Japan, 262-269 (CD-ROM).

  192. Duan, Y.F., Xu, Y.L., Fei, Q.G., Wong, K.Y., Chan, K.W.Y., and Ni, Y.Q. (2006), “Full 3D finite element model for criticality analysis of Tsing Ma Bridge”, Proceedings of the International Conference on Bridge Engineering: Challenges in the 21st Century, 1-3 November 2006, Hong Kong (CD-ROM).

  193. Cheng, S.W., Ni, Y.Q., and Ko, J.M. (2006), “Optimal deployment of sensors for cable stress monitoring in a long-span cable-stayed bridge”, Proceedings of the International Conference on Bridge Engineering: Challenges in the 21st Century, 1-3 November 2006, Hong Kong (CD-ROM).

  194. Chen, Z.Q., Wang, X.Y., Yu, J.D., Ni, Y.Q., and Ko, J.M. (2006), “Field measurements of wind-rain-induced cable vibration control with MR dampers”, Proceedings of the 4th World Conference on Structural Control and Monitoring, 11-13 July 2006, San Diego, California, USA (CD-ROM).

  195. Ni, Y.Q., Duan, Y.F., and Ko, J.M. (2006), “Nonlinear dampers for wind-rain-induced cable vibration control in cable-stayed bridges”, Proceedings of the 4th World Conference on Structural Control and Monitoring, 11-13 July 2006, San Diego, California, USA (CD-ROM).

  196. Ni, Y.Q., Chen, G., Ye, X.W., and Ko, J.M. (2006), “Fatigue life assessment of a suspension bridge using long-term monitoring data”, Proceedings of the 4th World Conference on Structural Control and Monitoring, 11-13 July 2006, San Diego, California, USA (CD-ROM).

  197. Or, S.W., Duan, Y.F., Ni, Y.Q., and Chan, T.K. (2006), “Development of self-sensing magnetorheological dampers for structural vibration control”, Proceedings of the 10th International Conference on Electrorheological Fluids and Magnetorheological Suspensions, 18-22 June 2006, Lake Tahoe, USA.

  198. Ko, J.M., Hua, X.G., and Ni, Y.Q. (2006), “Damage detection of cable-stayed bridges using change in cable forces”, Proceedings of the 3rd International Workshop on Advanced Smart Materials and Smart Structures Technology, 29-30 May 2006, Lake Tahoe, USA.

  199. Duan, Y.F., Ni, Y.Q., and Ko, J.M. (2006), “Comparative study on passive, semi-active and active control of wind-rain-induced cable vibration”, Proceedings of the 3rd International Workshop on Advanced Smart Materials and Smart Structures Technology, 29-30 May 2006, Lake Tahoe, USA.

  200. Zhou, H.F., Ni, Y.Q., and Ko, J.M. (2006), “Analysis of structural health monitoring data from the suspension Jiangyin Bridge”, Proceedings of the 3rd European Workshop on Structural Health Monitoring, A. Guemes (ed.), DEStech Publications, Lancaster, Pennsylvania, USA, 364-371.

  201. Hua, X.G., Ni, Y.Q., and Ko, J.M. (2006), “Probabilistic identification of structural parameters using an integrated perturbation and Bayesian method”, Structural Health Monitoring and Intelligent Infrastructure, J.P. Ou, H. Li and Z.D. Duan (eds.), Taylor & Francis, London, UK, Vol. 2, 1021-1027.

  202. Ni, Y.Q., Zhou, H.F., and Ko, J.M. (2006), “Modeling of temperature-frequency correlation using long-term monitoring data: methods and comparison”, Structural Health Monitoring and Intelligent Infrastructure, J.P. Ou, H. Li and Z.D. Duan (eds.), Taylor & Francis, London, UK, Vol. 1, 335-344.

  203. Ko, J.M., and Ni, Y.Q. (2006), “Technology issues in developing structural health monitoring systems for long-span bridges”, Structural Health Monitoring and Intelligent Infrastructure, J.P. Ou, H. Li and Z.D. Duan (eds.), Taylor & Francis, London, UK, Vol. 1, 95-105.

  204. Dong, X., Zhang, Y., Xu, H., and Ni, Y.Q. (2005), “Research and design of structural health monitoring system for the Sutong Bridge”, Structural Health Monitoring 2005: Advancements and Challenges for Implementation, F.-K. Chang (ed.), DEStech Publications, Lancaster, Pennsylvania, USA, 1736-1742.

  205. Hua, X.G., Ni, Y.Q., and Ko, J.M. (2005), “Characterization of modal variability in Ting Kau Bridge using support vector machine and principal component analysis”, Structural Health Monitoring 2005: Advancements and Challenges for Implementation, F.-K. Chang (ed.), DEStech Publications, Lancaster, Pennsylvania, USA, 349-357.

  206. Hua, X.G., Kolackova, J., Ni, Y.Q., and Ko, J.M. (2005), “Condition assessment of bridge expansion joints via long-term displacement measurement”, Proceedings of the 2nd International Workshop on Advanced Smart Materials and Structures Technology, C.-B. Yun and B.F. Spencer, Jr. (eds.), Techno-Press, Daejeon, Korea, 703-713.

  207. Ni, Y.Q., Ko, J.M., Chan, T.K., and Hua, X.G. (2005), “Variability of measured modal frequencies of a cable-stayed bridge under different wind conditions”, Proceedings of the 2nd International Workshop on Advanced Smart Materials and Structures Technology, C.-B. Yun and B.F. Spencer, Jr. (eds.), Techno-Press, Daejeon, Korea, 613-623.

  208. Duan, Y.F., Zhan, S., Ni, Y.Q., and Ko, J.M. (2005), “Experimental study on vibration mitigation of adjacent buildings interconnected with MR and viscous dampers”, Proceedings of the 2nd International Workshop on Advanced Smart Materials and Structures Technology, C.-B. Yun and B.F. Spencer, Jr. (eds.), Techno-Press, Daejeon, Korea, 443-453.

  209. Or, S.W., Duan, Y.F., Ni, Y.Q., Chan, H.L.W., and Ko, J.M. (2005), “Magneto-rheological dampers with embedded piezoelectric sensors for structural vibration control”, Proceedings of the 2nd International Workshop on Advanced Smart Materials and Structures Technology, C.-B. Yun and B.F. Spencer, Jr. (eds.), Techno-Press, Daejeon, Korea, 433-442.

  210. Ko, J.M., Fan, K.Q., and Ni, Y.Q. (2005), “Upgrade of a structural health monitoring system for the suspension Jiangyin Bridge”, Proceedings of the 4th International Seminar on Safety of Infrastructure, G.-H. Juhn, C.-B. Yun and B.F. Spencer, Jr. (eds.), Korea Infrastructure Safety and Technology Corporation, Gyeongju, Korea, 17-27.

  211. Ko, J.M., Duan, Y.F., and Ni, Y.Q. (2005), “Mitigation of cable vibration using magneto-rheological (MR) dampers: analysis and design procedures”, Safety and Reliability of Engineering Systems and Structures, G. Augusti, G.I. Schueller and M. Ciampoli (eds.), Millpress, Rotterdam, Netherlands, 3001-3008.

  212. Ni, Y.Q., Zhou, X.T., and Ko, J.M. (2005), “Time-frequency analysis of seismic response of a tall building model for damage assessment”, Safety and Reliability of Engineering Systems and Structures, G. Augusti, G.I. Schueller and M. Ciampoli (eds.), Millpress, Rotterdam, Netherlands, 2905-2912.

  213. Hua, X.G., Ni, Y.Q., Zhou, H.F., and Ko, J.M. (2005), “Instrumentation for durability monitoring of a long-span cable-stayed bridge”, Smart Structures and Materials 2005: Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems, M. Tomizuka (ed.), SPIE Vol. 5765, 982-991.

  214. Zhou, H.F., Ni, Y.Q., and Ko, J.M. (2005), “Performance of neural networks for simulation and prediction of temperature-induced modal variability”, Smart Structures and Materials 2005: Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems, M. Tomizuka (ed.), SPIE Vol. 5765, 912-922.

  215. Ko, J.M., Duan, Y.F., and Ni, Y.Q. (2005), “Modeling of a full-scale MR damper and its application in open-loop vibration control of stay cables”, Smart Structures and Materials 2005: Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems, M. Tomizuka (ed.), SPIE Vol. 5765, 690-700.

  216. Duan, Y.F., Ni, Y.Q., and Ko, J.M. (2005), “Design guidelines for open-loop vibration control of stay cables using MR dampers”, Smart Structures and Materials 2005: Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems, M. Tomizuka (ed.), SPIE Vol. 5765, 678-689.

  217. Duan, Y.F., Ni, Y.Q., and Ko, J.M. (2005), “Cable vibration control using magneto-rheological (MR) dampers”, Electrorheological Fluids and Magnetorheological Suspensions (ERMR 2004), K. Lu, R. Shen and J. Liu (eds.), World Scientific, Singapore, 829-835.

  218. Chan, T.H.T., Cheng, K.K., Tam, H.Y., Ni, Y.Q., Liu, S.Y., and Chung, W.H. (2005), “Use of FBG optical sensors for structural health monitoring: practical application”, Proceedings of the 30th Australian Conference on Optical Fibre Technology, 4-8 July 2005, Sydney, Australia (CD-ROM).

  219. Ni, Y.Q., Ko, J.M., Zhou, H.F., and Hua, X.G. (2004), “Challenges in developing structural health monitoring system for a long-span cable-stayed bridge”, Proceedings of the US-Korea Joint Seminar/Workshop on Smart Structures Technologies, Techno-Press, Daejeon, Korea, 373-386.

  220. Ni, Y.Q., Hua, X.G., Zhou, H.F., and Ko, J.M. (2004), “Structural health monitoring system for cable-stayed Sutong Bridge”, Proceedings of the 3rd International Conference on Advances in Structural Engineering and Mechanics, C.-K. Choi, S.-H. Kim and H.-G. Kwak (eds.), Techno-Press, Daejeon, Korea, 1769-1777.

  221. Ni, Y.Q., Hua, X.G., Fan, K.Q., and Ko, J.M. (2004), “Correlating modal frequency with temperature for a cable-stayed bridge using long-term monitoring data and support vector machine technique”, Progress in Structural Engineering, Mechanics and Computation, A. Zingoni (ed.), A.A. Balkema, Rotterdam, Netherlands, 627-633. (DOI)

  222. Duan, Y.F., Ni, Y.Q., and Ko, J.M. (2004), “Theoretical and experimental studies on semi-active feedback control of cable vibration using MR dampers”, Smart Structures and Materials 2004: Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems, S.-C. Liu (ed.), SPIE Vol. 5391, 543-554. (DOI)

  223. Ko, J.M., Zhan, S., Ni, Y.Q., and Duan, Y.F. (2004), “Smart TLCD using synthetic hydrocarbon based MR fluid: an experimental study”, Smart Structures and Materials 2004: Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems, S.-C. Liu (ed.), SPIE Vol. 5391, 250-261. (DOI)

  224. Chan, T.H.T., Tam, H.-Y., Ni, Y.Q., Liu, S.Y., Guan, B.O., Chung, W.H., and Chan, T.L. (2004), “Using optical fibre sensors for structural health monitoring of Tsing Ma Bridge”, Advanced Smart Materials and Structures Technology, F.-K. Chang, C.B. Yun and B.F. Spencer, Jr. (eds.), DEStech Publications, Lancaster, Pennsylvania, USA, 539-546. 

  225. Wang, J.Y., Ni, Y.Q., and Ko, J.M. (2003), “Local damage detection of bridges using signals of strain measurements”, Structural Health Monitoring and Intelligent Infrastructure, Z.S. Wu and M. Abe (eds.), A.A. Balkema, Lisse, Netherlands, Vol. 2, 1081-1088. (DOI)

  226. Ni, Y.Q., Zhou, X.T., and Ko, J.M. (2003), “Modal and seismic damage identification of a tall building model”, Structural Health Monitoring and Intelligent Infrastructure, Z.S. Wu and M. Abe (eds.), A.A. Balkema, Lisse, Netherlands, Vol. 1, 575-583.

  227. Ni, Y.Q., Ko, J.M., and Wang, J.Y. (2003), “Environmental vibration in cable-supported bridges”, Environmental Vibration: Prediction, Monitoring and Evaluation, Y. Chen and H. Takemiya (eds.), China Communications Press, Beijing, China, 323-334.

  228. Ko, J.M., Wang, J.Y., Ni, Y.Q., and Chak, K.K. (2003), “Observation on environmental variability of modal properties of a cable-stayed bridge from one-year monitoring data”, Structural Health Monitoring 2003: From Diagnostics & Prognostics to Structural Health Management, F.-K. Chang (ed.), DEStech Publications, Lancaster, Pennsylvania, USA, 467-474.

  229. Ni, Y.Q., Fan, K.Q., Zheng, G., Chan, T.H.T., and Ko, J.M. (2003), “Automatic modal identification of cable-supported bridges instrumented with a long-term monitoring system”, Smart Structures and Materials 2003: Smart Systems and Nondestructive Evaluation for Civil Infrastructures, S.-C. Liu (ed.), SPIE Vol. 5057, 329-339.

  230. Ko, J.M., Chak, K.K., Wang, J.Y., Ni, Y.Q., and Chan, T.H.T. (2003), “Formulation of an uncertainty model relating modal parameters and environmental factors by using long-term monitoring data”, Smart Structures and Materials 2003: Smart Systems and Nondestructive Evaluation for Civil Infrastructures, S.-C. Liu (ed.), SPIE Vol. 5057, 298-307.

  231. Chen, Z.Q., Wang, X.Y., Ko, J.M., Ni, Y.Q., Spencer, B.F., Jr., and Yang, G. (2003), “MR damping system on Dongting Lake cable-stayed bridge”, Smart Structures and Materials 2003: Smart Systems and Nondestructive Evaluation for Civil Infrastructures, S.-C. Liu (ed.), SPIE Vol. 5057, 229-235.

  232. Duan, Y.F., Ni, Y.Q., Ko, J.M., and Chen, Z.Q. (2003), “Amplitude-dependent frequency and damping identification of bridge cables with MR dampers in different setups”, Smart Structures and Materials 2003: Smart Systems and Nondestructive Evaluation for Civil Infrastructures, S.-C. Liu (ed.), SPIE Vol. 5057, 218-228.

  233. Ni, Y.Q., Ying, Z.G., Wang, J.Y., Ko, J.M., and Spencer, B.F., Jr. (2003), “Semi-active control of randomly wind-excited tall building structures using MR-TLCDs”, Advances in Stochastic Structural Dynamics, W.Q. Zhu, G.Q. Cai and R.C. Zhang (eds.), CRC Press, Boca Raton, Florida, USA, 377-384.

  234. Teng, J.G., Ko, J.M., Chan, H.T.H., Ni, Y.Q., Xu, Y.L., Chan, S.L., Chau, K.T., and Yin, J.H. (2003), “Third-generation structures: intelligent high-performance structures for sustainable urban systems”, Proceedings of the International Symposium on Diagnosis, Treatment and Regeneration for Sustainable Urban Systems, Ibaraki, Japan, 41-55.

  235. Ko, J.M., Ni, Y.Q., Chen, Z.Q., and Spencer Jr., B.F. (2003), “Implementation of MR dampers to Dongting Lake Bridge for cable vibration mitigation”, Proceedings of the 3rd World Conference on Structural Control, F. Casciati (ed.), John Wiley & Sons, Chichester, England, Vol. 3, 777-786.

  236. Ni, Y.Q., Chen, Y., Ko, J.M., and Zheng, G. (2003), “Optimal voltage/current input to ER/MR dampers for multi-switch control of stay cable vibration”, Proceedings of the 3rd World Conference on Structural Control, F. Casciati (ed.), John Wiley & Sons, Chichester, England, Vol. 3, 767-775.

  237. Chen, Z.Q., Wang, X.Y., Ni, Y.Q., and Ko, J.M. (2003), “Field measurements on wind-rain-induced vibration of bridge cables with and without MR dampers”, Proceedings of the 3rd World Conference on Structural Control, F. Casciati (ed.), John Wiley & Sons, Chichester, England, Vol. 3, 393-401.

  238. Ni, Y.Q., Ko, J.M., Chen, Z.Q., and Spencer, B.F., Jr. (2002), “Lessons learned from application of semi-active MR dampers to bridge cables for wind-rain-induced vibration control”, Proceedings of China-Japan Workshop on Vibration Control and Health Monitoring of Structures, 8-10 December 2002, Shanghai, China (CD-ROM). (DOI)

  239. Duan, Y.F., Ko, J.M., Ni, Y.Q., and Chen, Z.Q. (2002), “Field comparative tests of cable vibration control using magneto-rheological (MR) dampers in single- and twin-damper setups”, Advances in Steel Structures, S.L. Chan, J.G. Teng and K.F. Chung (eds.), Elsevier Science Ltd., Oxford, UK, Vol. II, 849-856. (DOI)

  240. Zheng, G., Ni, Y.Q., Li, H., and Duan, Y.F. (2002), “Parameter optimization of multi-TMDs for wind-excited vibration suppression of tall buildings”, Advances in Building Technology, M. Anson, J.M. Ko and E.S.S. Lam (eds.), Elsevier Science Ltd., Oxford, UK, Vol. II, 1025-1032. (DOI)

  241. Ko, J.M., Zhou, X.T., and Ni, Y.Q. (2002), “Seismic damage evaluation of a 38-storey building model using measured FRF data reduced via principal component analysis”, Advances in Building Technology, M. Anson, J.M. Ko and E.S.S. Lam (eds.), Elsevier Science Ltd., Oxford, UK, Vol. II, 953-960.

  242. Wang, J.Y., Ni, Y.Q., Ko, J.M., and Spencer, B.F., Jr. (2002), “Semi-active TLCDs using magneto-rheological fluids for vibration mitigation of tall buildings”, Advances in Building Technology, M. Anson, J.M. Ko and E.S.S. Lam (eds.), Elsevier Science Ltd., Oxford, UK, Vol. I, 537-544.

  243. Wang, J.Y., Ni, Y.Q., Ko, J.M., and Chan, T.H.T. (2002), “Damage detection of long-span cable-supported bridges”, Structural Health Monitoring: Proceedings of the 1st International Workshop on Structural Health Monitoring of Innovative Civil Engineering Structures, A.A. Mufti (ed.), ISIS Canada Corporation, Winnipeg, Canada, 299-308. (DOI)

  244. Ni, Y.Q., Zheng, G., and Ko, J.M. (2002), “Dynamic monitoring of bridge cables for condition assessment”, Proceedings of the 2nd International Conference on Advances in Structural Engineering and Mechanics, C.-K. Choi and W.C. Schnobrich (eds.), Techno-Press, Daejeon, Korea (CD-ROM).

  245. Li, H., Ko, J.M., Wang, J.Y., and Ni, Y.Q. (2002), “Validating baseline model of cable-stayed Ting Kau Bridge for structural health monitoring”, Proceedings of the 2nd International Conference on Advances in Structural Engineering and Mechanics, C.-K. Choi and W.C. Schnobrich (eds.), Techno-Press, Daejeon, Korea (CD-ROM).

  246. Ni, Y.Q., Ko, J.M., Huang, Z.L., and Wang, J.Y. (2002), “Active control study of cable-stayed Ting Kau Bridge under stochastic earthquake excitation”, Proceedings of the International Conference on Advances and New Challenges in Earthquake Engineering Research, Hong Kong, 453-461.

  247. Chau, K.T., Xu, Y.L., Ko, J.M., Lam, E.S.S., Wong, Y.L., Lee, C.M., and Ni, Y.Q. (2002), “Earthquake hazard evaluation and risk mitigation in Hong Kong”, Proceedings of the International Conference on Advances and New Challenges in Earthquake Engineering Research, Hong Kong, 17-32.

  248. Zhou, X.T., Ni, Y.Q., and Ko, J.M. (2002), “Seismic damage identification of a tested tall building model using Hilbert-Huang transform and novelty detection technique”, Proceedings of the 1st European Workshop on Structural Health Monitoring, D.L. Balageas (ed.), DEStech Publications, Lancaster, Pennsylvania, USA, 1091-1098.

  249. Ni, Y.Q., Li, H., Wang, J.Y., and Ko, J.M. (2002), “Implementation issues of novelty detection technique for cable-supported bridges instrumented with a long-term monitoring system”, Nondestructive Evaluation and Health Monitoring of Aerospace Materials and Civil Infrastructures, A.L. Gyekenyesi, S.M. Shepard, D.R. Huston, A.E. Aktan and P.J. Shull (eds.), SPIE Vol. 4704, 225-236. (DOI)

  250. Ni, Y.Q., Liu, H.J., and Ko, J.M. (2002), “Experimental investigation on seismic response control of adjacent buildings using semi-active MR dampers”, Smart Structures and Materials 2002: Smart Systems for Bridges, Structures, and Highways, S.-C. Liu and D.J. Pines (eds.), SPIE Vol. 4696, 334-344. (DOI)

  251. Ying, Z.G., Ni, Y.Q., and Ko, J.M. (2002), “Non-clipping optimal control of randomly excited nonlinear systems using semi-active ER/MR dampers”, Smart Structures and Materials 2002: Smart Systems for Bridges, Structures, and Highways, S.-C. Liu and D.J. Pines (eds.), SPIE Vol. 4696, 209-218. (DOI)

  252. Ni, Y.Q., Duan, Y.F., Chen, Z.Q., and Ko, J.M. (2002), “Damping identification of MR-damped bridge cables from in-situ monitoring under wind-rain-excited conditions”, Smart Structures and Materials 2002: Smart Systems for Bridges, Structures, and Highways, S.-C. Liu and D.J. Pines (eds.), SPIE Vol. 4696, 41-51. (DOI)

  253. Ko, J.M., Zheng, G., Chen, Z.Q., and Ni, Y.Q. (2002), “Field vibration tests of bridge stay cables incorporated with magnetorheological (MR) dampers”, Smart Structures and Materials 2002: Smart Systems for Bridges, Structures, and Highways, S.-C. Liu and D.J. Pines (eds.), SPIE Vol. 4696, 30-40. (DOI)

  254. Zhou, X.T., Ko, J.M., and Ni, Y.Q. (2001), “Shaking table test of a concrete frame model for health monitoring study”, Structural Health Monitoring: The Demands and Challenges, F.-K. Chang (ed.), CRC Press, Boca Raton, Florida, USA, 651-659. (DOI)

  255. Ni, Y.Q., Ko, J.M., and Zhou, X.T. (2001), “Damage region identification of cable-supported bridges using neural network based novelty detectors”, Structural Health Monitoring: The Demands and Challenges, F.-K. Chang (ed.), CRC Press, Boca Raton, Florida, USA, 449-458. (DOI)

  256. Sun, Z.G., Ko, J.M., and Ni, Y.Q. (2001), “Modal indices for identifying damage location in cable-stayed Kap Shui Mun Bridge”, Health Monitoring and Management of Civil Infrastructure Systems, S.B. Chase and A.E. Aktan (eds.), SPIE Vol. 4337, 379-389. (DOI)

  257. Ko, J.M., Ni, Y.Q., Sun, Z.G., and Chan, T.H.T. (2001), “Remote visualized health monitoring of cable-supported bridges”, Health Monitoring and Management of Civil Infrastructure Systems, S.B. Chase and A.E. Aktan (eds.), SPIE Vol. 4337, 368-378. (DOI)

  258. Ni, Y.Q., Jiang, S.F., and Ko, J.M. (2001), “Application of adaptive probabilistic neural network to damage detection of Tsing Ma suspension bridge”, Health Monitoring and Management of Civil Infrastructure Systems, S.B. Chase and A.E. Aktan (eds.), SPIE Vol. 4337, 347-356. (DOI)

  259. Zheng, G., Ko, J.M., and Ni, Y.Q. (2001), “Multimode-based evaluation of cable tension force in cable-supported bridges”, Smart Structures and Materials 2001: Smart Systems for Bridges, Structures, and Highways, S.C. Liu (ed.), SPIE Vol. 4330, 511-522.

  260. Ni, Y.Q., Spencer Jr., B.F., and Ko, J.M. (2001), “Feasibility of active control of cable-stayed bridges: an insight into Ting Kau Bridge”, Smart Structures and Materials 2001: Smart Systems for Bridges, Structures, and Highways, S.C. Liu (ed.), SPIE Vol. 4330, 387-398.

  261. Chen, Y., Ko, J.M., and Ni, Y.Q. (2001), “Semi-active vibration control of stay cables using neural networks”, Smart Structures and Materials 2001: Smart Systems for Bridges, Structures, and Highways, S.C. Liu (ed.), SPIE Vol. 4330, 377-386.

  262. Sun, B.N., Wang, Z.G., Ko, J.M., and Ni, Y.Q. (2001), “Cable parametric oscillation and its control for cable-stayed bridges”, Smart Structures and Materials 2001: Smart Systems for Bridges, Structures, and Highways, S.C. Liu (ed.), SPIE Vol. 4330, 366-376. (DOI)

  263. Lou, W.J., Ni, Y.Q., and Ko, J.M. (2001), “Modal damping and stepping-switch control of stay cables with magnetorheological fluid dampers”, Smart Structures and Materials 2001: Smart Systems for Bridges, Structures, and Highways, S.C. Liu (ed.), SPIE Vol. 4330, 354-365.

  264. Ying, Z.G., Ni, Y.Q., and Ko, J.M. (2001), “Seismic response mitigation of adjacent high-rise structures via stochastic optimal coupling-control”, Smart Structures and Materials 2001: Smart Systems for Bridges, Structures, and Highways, S.C. Liu (ed.), SPIE Vol. 4330, 289-300. (DOI)

  265. Wang, B.S., Liang, X.B., Ni, Y.Q., and Ko, J.M. (2001), “Comparative study of damage indices for long-span bridges”, Proceedings of the 19th International Modal Analysis Conference, Kissimmee, Florida, USA, 1374-1380. (DOI)

  266. Ni, Y.Q., Spencer Jr., B.F., and Ko, J.M. (2001), “Active/semiactive seismic response control of cable-supported bridges: current research status and key issues”, Earthquake Engineering Frontiers in the New Millennium, B.F. Spencer, Jr. and Y.X. Hu (eds.), A.A. Balkema, Rotterdam, Netherlands, 299-304. (DOI)

  267. Ko, J.M., Ni, Y.Q., and He, G.J. (2001), “Seismic response characteristics of multispan cable-stayed bridges with stabilizing cables”, Earthquake Engineering Frontiers in the New Millennium, B.F. Spencer, Jr. and Y.X. Hu (eds.), A.A. Balkema, Rotterdam, Netherlands, 227-232. 

  268. Ko, J.M., Sun, Z.G., and Ni, Y.Q. (2001), “A three-stage scheme for damage detection of Kap Shui Mun cable-stayed bridge”, Structural Engineering, Mechanics and Computation, A. Zingoni (ed.), Elsevier Science Ltd., Oxford, UK, Vol. I, 111-122. (DOI)

  269. Ni, Y.Q., Cao, D.Q., Ko, J.M., and Chen, Y. (2000), “Neuro-control of inclined sagged cables using semi-active MR dampers”, Advances in Structural Dynamics, J.M. Ko and Y.L. Xu (eds.), Elsevier Science Ltd., Oxford, UK, Vol. II, 1373-1380. (DOI)

  270. Lou, W.J., Ni, Y.Q., and Ko, J.M. (2000), “Dynamic properties of a stay cable incorporated with magneto-rheological fluid dampers”, Advances in Structural Dynamics, J.M. Ko and Y.L. Xu (eds.), Elsevier Science Ltd., Oxford, UK, Vol. II, 1341-1348. (DOI)

  271. Ko, J.M., Chen, Y., Zheng, G., and Ni, Y.Q. (2000), “Experimental study on vibration mitigation of a stay cable using nonlinear hysteretic dampers”, Advances in Structural Dynamics, J.M. Ko and Y.L. Xu (eds.), Elsevier Science Ltd., Oxford, UK, Vol. II, 1325-1332. (DOI)

  272. Cao, D.Q., Ko, J.M., Ni, Y.Q., and Liu, H.J. (2000), “Decentralized active tendon control and stability of cable-stayed bridges”, Advances in Structural Dynamics, J.M. Ko and Y.L. Xu (eds.), Elsevier Science Ltd., Oxford, UK, Vol. II, 1257-1264.

  273. Zheng, G., Ko, J.M., and Ni, Y.Q. (2000), “Internal resonance of nonlinear cables with nearly commensurable natural frequencies”, Advances in Structural Dynamics, J.M. Ko and Y.L. Xu (eds.), Elsevier Science Ltd., Oxford, UK, Vol. II, 1231-1238.

  274. Wang, B.S., Liang, X.B., Ni, Y.Q., and Ko, J.M. (2000), “Comparative study of damage indices in application to a long-span suspension bridge”, Advances in Structural Dynamics, J.M. Ko and Y.L. Xu (eds.), Elsevier Science Ltd., Oxford, UK, Vol. II, 1085-1092.

  275. Ni, Y.Q., Zhou, X.T., Ko, J.M., and Wang, B.S. (2000), “Vibration-based damage localization in Ting Kau Bridge using probabilistic neural network”, Advances in Structural Dynamics, J.M. Ko and Y.L. Xu (eds.), Elsevier Science Ltd., Oxford, UK, Vol. II, 1069-1076. (DOI)

  276. Ko, J.M., Ni, Y.Q., Zhou, X.T., and Wang, J.Y. (2000), “Structural damage alarming in Ting Kau Bridge using auto-associative neural networks”, Advances in Structural Dynamics, J.M. Ko and Y.L. Xu (eds.), Elsevier Science Ltd., Oxford, UK, Vol. II, 1021-1028. (DOI)

  277. Wang, J.Y., Ko, J.M., and Ni, Y.Q. (2000), “Participation of local modes in seismic response of Tsing Ma Suspension Bridge”, Advances in Structural Dynamics, J.M. Ko and Y.L. Xu (eds.), Elsevier Science Ltd., Oxford, UK, Vol. II, 963-970.

  278. Sun, B.N., Wang, Z.G., Ko, J.M., and Ni, Y.Q. (2000), “Cable oscillation induced by parametric excitation in cable-stayed bridges”, Advances in Structural Dynamics, J.M. Ko and Y.L. Xu (eds.), Elsevier Science Ltd., Oxford, UK, Vol. I, 553-560.

  279. Ni, Y.Q., Wang, J.Y., and Ko, J.M. (2000), “Modal interaction in cable-stayed Ting Kau Bridge”, Advances in Structural Dynamics, J.M. Ko and Y.L. Xu (eds.), Elsevier Science Ltd., Oxford, UK, Vol. I, 537-544. (DOI)

  280. Ko, J.M., Sun, Z.G., and Ni, Y.Q. (2000), “Modal analysis of cable-stayed Kap Shui Mun Bridge taking cable local vibration into consideration”, Advances in Structural Dynamics, J.M. Ko and Y.L. Xu (eds.), Elsevier Science Ltd., Oxford, UK, Vol. I, 529-536. (DOI)

  281. Chan, T.H.T., Wang, J.Y., Ni, Y.Q., and Ko, J.M. (2000), “Importance of longitudinal stabilizing cables in dynamic characteristics of Ting Kau Bridge”, Advances in Structural Dynamics, J.M. Ko and Y.L. Xu (eds.), Elsevier Science Ltd., Oxford, UK, Vol. I, 467-474. 

  282. Chen, Y., Ko, J.M., and Ni, Y.Q. (2000), “Experimental investigation of cable vibration control using electro-rheological (ER) damper”, Proceedings of the International Symposium on Smart Structures and Microsystems, October 19-21, 2000, Hong Kong (CD-ROM). (DOI)

  283. Liu, H.J., Ni, Y.Q., and Ko, J.M. (2000), “Design and testing of ER/MR dampers for vibration mitigation”, Proceedings of the International Symposium on Smart Structures and Microsystems, October 19-21, 2000, Hong Kong (CD-ROM). (DOI)

  284. Ni, Y.Q., Ko, J.M., Ying, Z.G., Liu, H.J., and Chen, Y. (2000), “Development of smart damping systems for vibration control of civil engineering structures”, Proceedings of the International Conference on Engineering and Technological Sciences 2000 Session 5: Civil Engineering in the 21st Century, J. Song and G. Zhou (eds.), Science Press, Beijing, China, 858-865. (DOI)

  285. Ko, J.M., Ni, Y.Q., Wang, J.Y., Sun, Z.G., and Zhou, X.T. (2000), “Studies of vibration-based damage detection of three cable-supported bridges in Hong Kong”, Proceedings of the International Conference on Engineering and Technological Sciences 2000  Session 5: Civil Engineering in the 21st Century, J. Song and G. Zhou (eds.), Science Press, Beijing, China, 105-112. (DOI)

  286. Ni, Y.Q., Ying, Z.G., and Ko, J.M. (2000), “Nonlinear random vibration of Preisach hysteretic systems”, Proceedings of the International Conference on Advanced Problems in Vibration Theory and Applications, June 19-22, 2000, Xi’an, China, 568-574. (DOI)

  287. Ko, J.M., Zheng, G., and Ni, Y.Q. (2000), “Periodically forced vibration of nonlinear stay cables”, Proceedings of the International Conference on Advanced Problems in Vibration Theory and Applications, June 19-22, 2000, Xi’an, China, 437-443. (DOI)

  288. Ni, Y.Q., Lou, W.J., and Ko, J.M. (2000), “A Laplace transform based method for analyzing nonlinear transient response of cables”, Proceedings of the International Conference on Advanced Problems in Vibration Theory and Applications, June 19-22, 2000, Xi’an, China, 430-436. 

  289. Ko, J.M., Ni, Y.Q., and Wang, J.Y. (2000), “Tsing Ma Suspension Bridge: ambient vibration survey campaigns”, Proceedings of the International Conference on Advanced Problems in Vibration Theory and Applications, June 19-22, 2000, Xi’an, China, 285-291.

  290. Wang, B.S., Ni, Y.Q., Ko, J.M., and Zhou, X.T. (2000), “Structural damage localization using probabilistic neural network”, Proceedings of the International Conference on Advanced Problems in Vibration Theory and Applications, June 19-22, 2000, Xi’an, China, 271-277. (DOI)

  291. Chan, T.H.T., Ko, J.M., Ni, Y.Q., Lau, C.K., and Wong, K.Y. (2000), “A feasibility study on damage detection of three cable-supported bridges in Hong Kong using vibration measurements”, Proceedings of the International Workshop on Research and Monitoring of Long Span Bridges, April 26-28, 2000, Hong Kong, 204-211.

  292. Ko, J.M., Ni, Y.Q., and Chan, T.H.T. (2000), “Feasibility of damage detection of Tsing Ma Bridge using vibration measurements”, Nondestructive Evaluation of Highways, Utilities, and Pipelines IV, A.E. Aktan and S.R. Gosselin (eds.), SPIE Vol. 3995, 370-381.

  293. Ni, Y.Q., Wang, B.S., and Ko, J.M. (2000), “Simulation studies of damage location in Tsing Ma Bridge deck”, Nondestructive Evaluation of Highways, Utilities, and Pipelines IV, A.E. Aktan and S.R. Gosselin (eds.), SPIE Vol. 3995, 312-323. (DOI)

  294. Wang, J.Y., Ko, J.M., and Ni, Y.Q. (2000), “Modal sensitivity analysis of Tsing Ma Bridge for structural damage detection”, Nondestructive Evaluation of Highways, Utilities, and Pipelines IV, A.E. Aktan and S.R. Gosselin (eds.), SPIE Vol. 3995, 300-311.

  295. Li, Z.X., Ko, J.M., Chan, T.H.T., and Ni, Y.Q. (1999), “Determination of section properties of complicated structural members”, Advances in Steel Structures, S.L. Chan and J.G. Teng (eds.), Elsevier Science Ltd., Oxford, UK, Vol. II, 1109-1116. (DOI)

  296. Ni, Y.Q., Ko, J.M., and Zheng, G. (1999), “Free and forced vibration of large-diameter sagged cables taking into account bending stiffness”, Advances in Steel Structures, S.L. Chan and J.G. Teng (eds.), Elsevier Science Ltd., Oxford, UK, Vol. I, 513-520. (DOI)

  297. Ni, Y.Q., Wang, J.Y., and Ko, J.M. (1999), “Advanced method for modelling hysteretic behaviour of semi-rigid joints”, Advances in Steel Structures, S.L. Chan and J.G. Teng (eds.), Elsevier Science Ltd., Oxford, UK, Vol. I, 331-338.

  298. Ni, Y.Q., Cao, D.Q., Ko, J.M., and Lou, W.J. (1999), “Vibration control strategy for cables using semi-active magneto/electro-rheological (MR/ER) dampers”, Proceedings of the First International Conference on Structural Engineering, 18-20 October 1999, Kunming, China, 424-434.

  299. Ko, J.M., and Ni, Y.Q. (1999), “Development of vibration-based damage detection methodology for civil engineering structures”, Proceedings of the First International Conference on Structural Engineering, 18-20 October 1999, Kunming, China, 37-56.

  300. Ko, J.M., Ni, Y.Q., and Ying, Z.G. (1999), “Dynamic response of adjacent buildings coupled with nonlinear hysteretic dampers under random seismic excitation”, Proceedings of the International Seminar on New Seismic Design Methodologies for Tall Buildings, 15-16 October 1999, Beijing, China, 111-122.

  301. Chan, T.H.T., Ni, Y.Q., and Ko, J.M. (1999), “Neural network novelty filtering for anomaly detection of Tsing Ma Bridge cables”, Structural Health Monitoring 2000, F.-K. Chang (ed.), Technomic Publishing Co., Lancaster, Pennsylvania, 430-439. (DOI)

  302. Wang, J.Y., Ni, Y.Q., and Ko, J.M. (1999), “Transient dynamic response of Preisach hysteretic systems”, A New Advance in Seismic Isolation, Energy Dissipation and Control of Structures, F. Zhou and B.F. Spencer, Jr. (eds.), Seismological Press, Beijing, 378-385. (DOI)

  303. Ni, Y.Q., Ko, J.M., and Cao, D.Q. (1999), “Nonlinear vibration control of cables using passive hysteretic dampers”, A New Advance in Seismic Isolation, Energy Dissipation and Control of Structures, F. Zhou and B.F. Spencer, Jr. (eds.), Seismological Press, Beijing, 290-297.

  304. Zhu, W.Q., Ying, Z.G., Ni, Y.Q., and Ko, J.M. (1999), “Optimal energy dissipation control of hysteretic structures under random loading”, A New Advance in Seismic Isolation, Energy Dissipation and Control of Structures, F. Zhou and B.F. Spencer, Jr. (eds.), Seismological Press, Beijing, 267-274.

  305. Ni, Y.Q., Wang, B.S., and Ko, J.M. (1999), “Selection of input vectors to neural networks for structural damage identification”, Smart Structures and Materials 1999: Smart Systems for Bridges, Structures, and Highways, S.C. Liu (ed.), SPIE Vol. 3671, 270-280. (DOI)

  306. Ko, J.M., Ni, Y.Q., and Chan, T.H.T. (1999), “Dynamic monitoring of structural health in cable-supported bridges”, Smart Structures and Materials 1999: Smart Systems for Bridges, Structures, and Highways, S.C. Liu (ed.), SPIE Vol. 3671, 161-172. (DOI)

  307. Ni, Y.Q., Ko, J.M., and Wong, C.W. (1997), “Mathematical hysteresis models and their application to nonlinear vibration isolation systems”, Proceedings of the 6th International Conference on Recent Advances in Structural Dynamics, Southampton, UK, Vol. II, 1043-1057.

  308. Xue, S.D., Ni, Y.Q., and Ko, J.M. (1997), “Modal characteristics of tower-cable system in construction state of suspension bridge”, Proceedings of the 15th International Modal Analysis Conference, Orlando, Florida, USA, Vol. II, 1911-1917. (DOI)

  309. Ni, Y.Q., Wong, C.W., and Ko, J.M. (1996), “Modeling the unsymmetric hysteretic loops of friction-type isolators”, Proceedings of the 14th International Modal Analysis Conference, Dearborn, Michigan, USA, Vol. II, 1579-1585. (DOI)

  310. Wong, C.W., Ko, J.M., and Ni, Y.Q. (1995), “Behaviors of soft-hardening hysteretic isolation system under periodic excitation”, Proceedings of the International Conference on Structural Conference on Structural Dynamics, Vibration, Noise and Control, Hong Kong, Vol. I, 580-585. (DOI)

  311. Wong, C.W., Ko, J.M., and Ni, Y.Q. (1995), “Modeling the hysteresis curves of wire-cable isolators”, Proceedings of the 13th International Modal Analysis Conference, Nashville, Tennessee, USA, Vol. I, 643-649.

  312. Ni, Y.Q., Wong, C.W., and Ko, J.M. (1994), “The generalized orthogonal polynomial (GOP) method for stability analysis of periodic systems”, Proceedings of the International Conference on Computational Methods in Structural and Geotechnical Engineering, Hong Kong, Vol. II, 464-469.

  313. Ni, Y.Q., Ko, J.M., and Wong, C.W. (1994), “Identification of dynamic properties of large structures by ambient vibration measurements”, Proceedings of the International Symposium on Structures and Foundations in Civil Engineering, Hangzhou, China, 193-198.

​

  1. Lai, S.K., Wang, C., Zhang, L.H., and Ni, Y.Q. (2021), “Realizing a self-powered real-time monitoring system on high-speed trains”, Proceedings of the 50th International Congress and Exposition on Noise Control Engineering, 1-5 August 2021, Washington, DC, USA.(DOI)

  2. Ying, Z.G., Ni, Y.Q., and Ruan, Z.G. (2021), “Damping effect of a controlled nonlinear meso-scale beam under periodic excitation”, Proceedings of the International Conference on Intelligent Automation and Soft Computing, 26-28 May 2021, Chicago, IL, USA. (DOI)

  3. Zhou, L., Chen, S.X., and Ni, Y.Q. (2020), “Real-time monitoring of bolt looseness under an EMI-based PZT sensing network (Conference Presentation)”, Proc. SPIE 11379, Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems 2020, 113790H (24 April 2020). (DOI)

  4. Chen, R., and Ni, Y.Q. (2019), “SHM-based bridge reliability assessment with inherent modelling uncertainties: A nonparametric Bayesian approach”, Proceedings of the 17th International Probabilistic Workshop, 11-13 September 2019, Edinburgh, UK.

  5. Wei, Y.H., and Ni, Y.Q.(2019), “Variational autoencoder-based approach for rail defect identification”, Proceedings of the 12th International Workshop on Structural Health Monitoring, 10-12 September 2019, Stanford, California, USA. (DOI)

  6. Liao, C.L., Wang, S., and Ni, Y.Q. (2019), “Application of driving recorder to evaluate rail irregularity and vehicle swing”, Proceedings of the 12th International Workshop on Structural Health Monitoring, 10-12 September 2019, Stanford, California, USA. (DOI)

  7. Zhang, Q.H., Ni, Y.Q., and Zhou, L. (2019), “A Bayesian probabilistic approach for damage detection of a population of nominally identical structures: Application to railway wheel condition assessment”, Proceedings of the 12th International Workshop on Structural Health Monitoring, 10-12 September 2019, Stanford, California, USA. (DOI)

  8. Zhou, L., Chen, S.X., Choy, A., and Ni, Y.Q. (2019), “Monitoring of rail bolted joint looseness with PZT network-based EMI technique under a deep learning framework”, Proceedings of the 12th International Workshop on Structural Health Monitoring, 10-12 September 2019, Stanford, California, USA. (DOI)

  9. Chen, S.X., Ni, Y.Q., Liu, J.C., and Yao, N. (2019), “Deep learning-based data anomaly detection in rail track inspection”, Proceedings of the 12th International Workshop on Structural Health Monitoring, 10-12 September 2019, Stanford, California, USA. (DOI)

  10. Cheng, C.C., Ni, Y.Q., Hsu, K.T., and Wai, T.T. (2019), “Preliminary study of assessing delaminated cracks in cement asphalt mortar layer of high-speed rail track”, Proceedings of the 12th International Workshop on Structural Health Monitoring, 10-12 September 2019, Stanford, California, USA. (DOI)

  11. Wang, S., Duan, Y., Yau, J., and Ni, Y.Q. (2019), “Monitoring-assisted derailment prediction of a high-speed train running on a long-span cable-stayed bridge”, Proceedings of the 12th International Workshop on Structural Health Monitoring, 10-12 September 2019, Stanford, California, USA. (DOI)

  12. Zhang, B.Y., and Ni, Y.Q. (2019), “An inversed greedy method for information-based optimal sensor placement on bridges”, Proceedings of the 12th International Workshop on Structural Health Monitoring, 10-12 September 2019, Stanford, California, USA. (DOI)

  13. Zhu, Y., Laory, I., and Ni, Y.Q. (2019), “A temperature-driven one-class support vector machine method for anomaly detection”, Proceedings of the 12th International Workshop on Structural Health Monitoring, 10-12 September 2019, Stanford, California, USA. (DOI)

  14. Wang, Q.A., Ni, Y.Q., and Zhang, C. (2019), “A heteroscedastic Gaussian process approach for SHM-based modelling and forecasting of high-speed rail track slab deformation”, Proceedings of the 9th International Conference on Structural Health Monitoring of Intelligent Infrastructure, 4-7 August 2019, St. Louis, USA. (DOI)

  15. Wei, Y.H., Ni, Y.Q., and Wang, Q.A. (2019), “A Bayesian probabilistic approach for structural damage detection”, Proceedings of the 9th International Conference on Structural Health Monitoring of Intelligent Infrastructure, 4-7 August 2019, St. Louis, USA. (DOI)

  16. Ni, Y.Q., Gong, Y., and Wei, Y.H. (2019), “Structural health monitoring using a generative model”, Proceedings of the 14th International Workshop on Advanced Smart Materials and Smart Structures Technology, 18-21 July 2019, Rome, Italy.

  17. Chim, Y.Y., Leung, M.H.F., Ni, Y.Q., and Tsang, E.C.L. (2019), “RFID based battery-free sensor node for smart railway application using 3D-printing technology”, Proceedings of the 1st IEEE International Conference on Flexible and Printable Sensors and Systems, 7-10 July 2019, Glasgow, UK. (DOI)

  18. Liu, X.Z., and Ni, Y.Q. (2019), “Online high-order wheel polygonal wear detection for high-speed trains”, Proceedings of the 15th International Conference on Railway Engineering, 3-4 July 2019, Edinburgh, UK.

  19. Kanoje, N.K, and Ni, Y.Q. (2019), “Feature identification using guided waves on welded tracks utilizing wavelet signal decomposition”, Proceedings of the 1st International Conference on Advanced Technologies in Intelligent Control, Environment, Computing & Communication Engineering, 19-20 March 2019, Bangalore, India.

  20. Ni, Y.Q., and Zhang, Q.H. (2018), “A Bayesian machine learning approach for online wheel condition detection using track-side monitoring”, Proceedings of the 2018 IEEE International Conference on Intelligent Rail Transportation, 12-14 December 2018, Singapore. (DOI)

  21. Ding, S.Q., and Ni, Y.Q. (2018), “Polyelectrolytes-wrapped multi-walled carbon nanotubes on long period fiber grating sensors for structural health monitoring”, Proceedings of the 6th International Symposium on Nanotechnology in Construction, 2-5 December 2018, Hong Kong.

  22. Xia, Y.X., and Ni, Y.Q. (2018), “Wavelet-based signal processing of large SHM data”, Proceedings of the 7th Asia-Pacific Workshop on Structural Health Monitoring, 12-15 November 2018, Hong Kong. (DOI)

  23. Zhang, Q.H., and Ni, Y.Q. (2018), “Online wheel condition detection using standard and heteroscedastic Gaussian process learnings”, Proceedings of the 2nd International Workshop on Structural Health Monitoring for Railway System, 17-19 October 2018, Qingdao, China.

  24. Chen, S.X., and Ni, Y.Q. (2018), “Sub-Nyquist data acquisition in high-speed rail condition monitoring by means of compressive sensing”, Proceedings of the 2nd International Workshop on Structural Health Monitoring for Railway System, 17-19 October 2018, Qingdao, China. (DOI)

  25. Wang, X., Ni, Y.Q., and Zhou, L. (2018), “Bayesian approach for fatigue life assessment of high-speed trains using in-service monitoring data”, Proceedings of the 2nd International Workshop on Structural Health Monitoring for Railway System, 17-19 October 2018, Qingdao, China. (DOI)

  26. Xu, C., and Ni, Y.Q. (2018), “A variational Bayesian approach for temporally correlated source separation and application to thermal strain extraction of high-speed rail”, Proceedings of the 2nd International Workshop on Structural Health Monitoring for Railway System, 17-19 October 2018, Qingdao, China.

  27. Liu, X.Z., Ni, Y.Q., and Zhou, L. (2018), “Condition-based maintenance of high-speed railway vehicle wheels through trackside monitoring”, Proceedings of the 2nd International Workshop on Structural Health Monitoring for Railway System, 17-19 October 2018, Qingdao, China.

  28. Kuo, C.M., Huang, C.H., Lin, C.C., Pai, Y.H., and Ni, Y.Q. (2018), “Vibration characteristics of direct-fixation track with flexible fasteners”, Proceedings of the 2nd International Workshop on Structural Health Monitoring for Railway System, 17-19 October 2018, Qingdao, China. (DOI)

  29. Zhang, L.H., Ni, Y.Q., Lai, S.K., and Wang, S.G. (2018), “A novel machine learning technique for online health monitoring of high-speed trains”, Proceedings of the 2nd International Workshop on Structural Health Monitoring for Railway System, 17-19 October 2018, Qingdao, China.

  30. Dong, Y., Wang, X., and Ni, Y.Q. (2018), “Risk-informed real time decision making of fatigue-sensitive structures within high-speed train”, Proceedings of the 2nd International Workshop on Structural Health Monitoring for Railway System, 17-19 October 2018, Qingdao, China. (DOI)

  31. Ding, S., Han, B., and Ni, Y.Q.(2018), “Properties and application of novel pressure-sensitive sensors developed with field assisted quantum tunneling composites”, Proceedings of the 9th Cross-Strait Workshop on Structural Monitoring and Vibration Control in Civil Engineering, 19-22 August 2018, Fuzhou, China.

  32. Liu, X.Z., and Ni, Y.Q.(2018), “Online wheel tread defect detection for high-speed trains using a Bayesian approach”, Proceedings of the 7th World Conference on Structural Control and Monitoring, 22-25 July 2018, Qingdao, China. (DOI)

  33. Xu, C., and Ni, Y.Q. (2018), “A Bayesian source separation method for noisy observations by embedding Gaussian process prior”, Proceedings of the 7th World Conference on Structural Control and Monitoring, 22-25 July 2018, Qingdao, China.

  34. Ni, Y.Q., and Sajjadi Alehashem, S.M. (2018), “Experimental study of the effect of MR-damper on high-speed train bogie”, Proceedings of the 7th World Conference on Structural Control and Monitoring, 22-25 July 2018, Qingdao, China.

  35. Shi, X., Zhu, S., Ni, Y.Q., and Li, J. (2018), “Improve ride comfort of high-speed trains using re-centering negative stiffness dampers”, Proceedings of the 7th World Conference on Structural Control and Monitoring, 22-25 July 2018, Qingdao, China.

  36. Xia, Y.X., and Ni, Y.Q. (2018), “Time-dependent reliability analysis of bridges based on long-term strain data”, Proceedings of the 7th World Conference on Structural Control and Monitoring, 22-25 July 2018, Qingdao, China.

  37. Ni, Y.Q., and Chen, S.X. (2018), “Compressive sensing for vibration signals in high-speed rail monitoring”, Proceedings of the 9th European Workshop on Structural Health Monitoring, 10-13 July 2018, Manchester, UK.

  38. Chen, S.X., and Ni, Y.Q. (2018), “Compressive sensing for high-speed rail condition monitoring using redundant dictionary and joint reconstruction”, Proceedings of the 9th European Workshop on Structural Health Monitoring, 10-13 July 2018, Manchester, UK. (DOI)

  39. Xu, C., and Ni, Y.Q. (2018), “Bayesian source separation by embedding additive Gaussian process prior and structural thermal strain extraction”, Proceedings of the 1st Five-Universities (ZJU-HKPU-UIUC-UT-UNIST) Symposium on Smart Structure Systems and Informatics, 12-14 July 2018, Hangzhou, China.

  40. Wan, H.P., and Ni, Y.Q. (2018), “Gaussian process-based Bayesian approach to characterization of bridge strain responses using structural health monitoring data”, Proceedings of the 6th International Symposium on Reliability Engineering and Risk Management, 31 May - 1 June 2018, Singapore.

  41. Zhang, Y., Zhang, L.H., Lai, S.K., and Ni, Y.Q. (2017), “Free vibration analysis of cracked rectangular plates using the DSC method”, Proceedings of the Cross-Strait Symposium on Dynamical Systems and Vibration, 10-14 December, Hong Kong and 14-17 December, Macau. (DOI)

  42. Ni, Y.Q. (2017), “Structural health monitoring of infrastructure systems”, Keynote Speech, Proceedings of the 10th Workshop on Nondestructive Evaluation of Civil Infrastructural System, 26-27 October 2017, Taipei, Taiwan.

  43. Wang, Y.W., Ni, Y.Q., and Wang, X. (2017), “Detection of performance deterioration of high-speed train wheel based on Bayesian dynamic model”, Proceedings of the 11th International Workshop on Structural Health Monitoring, 12-14 September 2017, Stanford, California, USA. (DOI)

  44. Shen, Y., Wang, J., and Ni, Y.Q. (2017), “Structural health monitoring of high-speed railways using ultrasonic guided waves”, Proceedings of the 11th International Workshop on Structural Health Monitoring, 12-14 September 2017, Stanford, California, USA.

  45. Lai, S.K., Ni, Y.Q., and Zhang, L.H. (2017), “A correlation study of vibration and noise signals by analyzing its responses for monitoring of high-speed trains”, Proceedings of the 11th International Workshop on Structural Health Monitoring, 12-14 September 2017, Stanford, California, USA. (DOI)

  46. Wang, J., Yuan, M., and Ni, Y.Q. (2017), “Rail crack monitoring using fiber optic based ultrasonic guided wave detection technology”, Proceedings of the 11th International Workshop on Structural Health Monitoring, 12-14 September 2017, Stanford, California, USA. (DOI)

  47. Zhang, C., Ni, Y.Q., Zhou, L., and Wang, C.Y. (2017), “A new railway tunnel deformation monitoring system using FBG bending gauges”, Proceedings of the 2017 World Congress on Advances in Structural Engineering and Mechanics, 28 August - 1 September 2017, Ilsan, Korea. (DOI)

  48. Liu, X.Z., and Ni, Y.Q. (2017), “Wheel tread defect detection for high-speed trains using wheel impact load detector”, Proceedings of the 2017 World Congress on Advances in Structural Engineering and Mechanics, 28 August - 1 September 2017, Ilsan, Korea.

  49. Zhang, L.H., Ni, Y.Q., Wang, Y.W., and Xu, C. (2017), “Condition assessment of in-service high-speed trains based on Bayesian inference and time series analysis”, Proceedings of the 2017 World Congress on Advances in Structural Engineering and Mechanics, 28 August - 1 September 2017, Ilsan, Korea.

  50. Ming, Z.X., Wang, X., Wang, D., and Ni, Y.Q. (2017), “Towards a cloud-based data visualization system for online condition assessment of in-service high-speed train”, Proceedings of the 2017 World Congress on Advances in Structural Engineering and Mechanics, 28 August - 1 September 2017, Ilsan, Korea.

  51. Wang, Y.W., and Ni, Y.Q. (2017), “Bayesian dynamic linear model for real-time condition prediction”, Proceedings of the 8th Cross-Strait Workshop on Structural Monitoring and Vibration Control in Civil Engineering, 21-26 August 2017, Hangzhou, China.

  52. Ni, Y.Q., Ying, Z.G., and Liu, X.Z. (2017), “Online detection of wheel defect by extracting anomaly response features on rail: Analytical modelling, monitoring system design, and in-situ verification”, Proceedings of the 14th International Conference on Railway Engineering, 21-22 June 2017, Edinburgh, UK. (DOI)

  53. Lai, S.K., and Ni, Y.Q. (2017), “Active control for low-frequency noise in high-speed trains by thermo-acoustic waves”, Proceedings of the 14th International Conference on Railway Engineering, 21-22 June 2017, Edinburgh, UK.

  54. Ni, Y.Q., and Wang, Y.W. (2016), “Bayesian approach for characterizing wind-induced displacement responses of bridge using structural health monitoring data”, Proceedings of the 24th Australasian Conference on the Mechanics of Structures and Materials, 6-9 December 2016, Perth, Australia. (DOI)

  55. Chen, Z.H., and Ni, Y.Q. (2016), “Collocated control solution for enhanced damping of bridge cable with self-sensing MR damper”, Proceedings of the 14th International Symposium on Structural Engineering, 12-15 October 2016, Beijing, China. (DOI)

  56. Ni, Y.Q., and Chen, R. (2016), “Bayesian approach for mixture modelling of stress response data”, Proceedings of the 2016 International Conference on Advances in Structural Monitoring and Maintenance, 28 August - 1 September 2016, Jeju, Korea.

  57. Xia, Y.X., and Ni, Y.Q. (2016), “Development of site-specific live load model for bridge condition assessment based on long-term SHM data”, Proceedings of the 8th European Workshop on Structural Health Monitoring, 5-8 July 2016, Bilbao, Spain.

  58. Chen, R., and Ni, Y.Q. (2016), “Bayesian inference for mixture modelling of stress response data”, Proceedings of the 7th Cross-Strait Workshop on Structural Monitoring and Vibration Control in Civil Engineering, 5-8 July 2016, Taipei, Taiwan.

  59. Li, M., and Ni, Y.Q. (2016), “Bayesian blind source separation and structure change detection using monitoring strain data”, Proceedings of the 7th Cross-Strait Workshop on Structural Monitoring and Vibration Control in Civil Engineering, 5-8 July 2016, Taipei, Taiwan. 

  60. Wang, Y.W., and Ni, Y.Q. (2016), “Bayesian approach for characterizing the temperature-induced displacement of expansion joint”, Proceedings of the 7th Cross-Strait Workshop on Structural Monitoring and Vibration Control in Civil Engineering, 5-8 July 2016, Taipei, Taiwan.

  61. Wang, X., and Ni, Y.Q. (2016), “Analysis of influence of mean stress on fatigue life of in-service high-speed train bogies using monitoring data”, Proceedings of the 3rd International Conference on Railway Technology: Research, Development and Maintenance, J. Pombo (ed.), Civil-Comp Press, Stirlingshire, Scotland (5-8 April 2016, Cagliari, Sardinia, Italy). (DOI)

  62. Ni, Y.Q. (2016), “Sensor-enabled smart rail system and its application to high speed rail”, Proceedings of the 3rd Cross-Strait Forum on Smart Rail Development: Present & Future, 9-11 March 2016, Hong Kong.

  63. Ni, Y.Q., and Xia, H.W. (2015), “Kalman filter based estimation of neutral-axis position of bridge deck sections”, Proceedings of the 2nd International Conference on Performance-based and Lifecycle Structural Engineering, 9-11 December 2015, Brisbane, Australia. (DOI)

  64. Ni, Y.Q. (2015), “Health monitoring technologies for high-speed railway”, Keynote Speech, Proceedings of the 9th Workshop on Nondestructive Evaluation of Civil Infrastructure Systems, 29-30 October 2015, Taipei, Taiwan, 1-13.

  65. Ni, Y.Q. (2015), “SHM-enriched high speed rail systems”, Keynote Speech, Proceedings of the 10th International Workshop on Structural Health Monitoring, 1-3 September 2015, Stanford, California, USA. (DOI)

  66. Liu, X.Z., Ni, Y.Q., Wu, W.L., Pei, Y.F., Hou, Y.H., and Qin, D.Y. (2015), “AET-based pattern recognition technique for rail defect detection”, Proceedings of the 10th International Workshop on Structural Health Monitoring, 1-3 September 2015, Stanford, California, USA. (DOI)

  67. Ni, Y.Q., Liu, X.Z., Zhao, W.Z., and Liang, S.L. (2015), “Outlier detection in sensor-assisted online ride comfort assessment of high-speed trains”, Proceedings of the 10th International Workshop on Structural Health Monitoring, 1-3 September 2015, Stanford, California, USA.

  68. Lv, Z.B. Li, Q., Ni, Y.Q., Huang, Q., Wu, W.L., and Zhang, C. (2015), “An efficient method for galloping profile monitoring of power transmission lines by use of an inertial unit: theoretical and experimental investigation”, Proceedings of the 2015 World Congress on Advances in Structural Engineering and Mechanics, 25-29 August 2015, Incheon, Korea.

  69. Ni, Y.Q., and Li, M. (2015), “Reconstructing wind pressure measurement data by neural network technique”, Proceedings of the 7th International Conference on Structural Health Monitoring of Intelligent Infrastructure, 1-3 July 2015, Turin/Torino, Italy.

  70. Wang, Y.W., and Ni, Y.Q. (2015), “Correlation between displacement response and wind speed for an instrumented long-span bridge”, Proceedings of the 7th International Conference on Structural Health Monitoring of Intelligent Infrastructure, 1-3 July 2015, Turin/Torino, Italy.

  71. Ni, Y.Q., Wang, Y.W., and Xia, Y.X. (2015), “Using weigh-in-motion data to identify traffic loading on a long-span suspension bridge”, Proceedings of the 7th International Conference on Structural Health Monitoring of Intelligent Infrastructure, 1-3 July 2015, Turin/Torino, Italy. (DOI)

  72. Ni, Y.Q., Wang, X., and Ye, X.W. (2015), “Probabilistic fatigue assessment for high-speed train bogies using in-service monitoring data”, Proceedings of the 13th International Conference on Railway Engineering, 30 June - 1 July 2015, Edinburgh, UK.

  73. Wang, J., Liu, X.Z., and Ni, Y.Q. (2015), “A Bayesian approach for rail condition assessment and crack detection”, Proceedings of the 13th International Conference on Railway Engineering, 30 June - 1 July 2015, Edinburgh, UK.

  74. Qu, H.Y., Chen, G.D., and Ni, Y.Q. (2015), “Big data extraction with adaptive wavelet analysis (Presentation Video)”, Proceedings of the 2015 SPIE Smart Structures/NDE Conference on Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems, 9-12 March 2015, San Diego, California, USA.

  75. Xia, Y., Zhang, P., and Ni, Y.Q. (2014), “Temperature distribution of a super-tall tube-in-tube structure in south China”, Proceedings of the 13th International Symposium on Structural Engineering, 24-27 October 2014, Hefei, China.

  76. Ni, Y.Q., Wang, J., Xie, Q.L., and Lam, K.C. (2014), “A fiber Bragg grating sensing network for structural integrity monitoring of underground water pipes: Analysis of monitoring data”, Proceedings of the 5th International Forum on Opto-electronic Sensor-based Monitoring in Geo-engineering, 13-14 October 2014, Nanjing, China, 34-41. (DOI)

  77. Zhang, F.L., Ni, Y.Q., and Ni, Y.C. (2014), “Operational modal analysis of Canton tower using a Bayesian method”, Proceedings of the 2014 World Congress on Advances in Civil, Environmental, and Materials Research, 24-28 August 2014, Busan, Korea (CD-ROM). (DOI)

  78. Xia, Y.X., Ni, Y.Q., and Zhang, C. (2014), “Monitoring-based evaluation of unsymmetric dynamic response of a suspension bridge due to railway traffic and wind loading”, Proceedings of the 6th World Conference on Structural Control and Monitoring, 15-17 July 2014, Barcelona, Spain, 331-343.

  79. Ye, S.Q., Ni, Y.Q., and Li, Z.J. (2014), “A semi-active rail vehicle suspension incorporating negative stiffness emulated by magnetorheological (MR) damper”, Proceedings of the 6th World Conference on Structural Control and Monitoring, 15-17 July 2014, Barcelona, Spain, 1703-1711.

  80. Ni, Y.Q., Zhang, F.L., Xia, Y.X., and Au, S.K. (2014), “Modal identification of a long-span suspension bridge under different earthquake events”, Proceedings of the 6th World Conference on Structural Control and Monitoring, 15-17 July 2014, Barcelona, Spain, 303-317. 

  81. Ni, Y.Q., (2014), “Structural health monitoring of cable-supported bridges based on vibration measurements”, Proceedings of the 9th International Conference on Structural Dynamics, 30 June - 2 July 2014, Porto, Portugal, 65-72.

  82. Ni, Y.Q., Li, Z.G., Wu, F., and Liu, X.Z. (2014), “Crack detection of railway turnouts using PZT sensors”, Presented on the 2014 SPIE Smart Structures/NDE Conference on Health Monitoring of Structural and Biological Systems VIII, 11-12 March 2014, San Diego, California, USA. (DOI)

  83. Ni, Y.Q., Wang, Y.W., and Song, S.D. (2014), “Field measurement of wind pressure distribution at a supertall structure above maximum gradient wind level (Presentation Video)”, Proceedings of the 2014 SPIE Smart Structures/NDE Conference on Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems, 11-12 March 2014, San Diego, California, USA.

  84. Ni, Y.Q., Su, J., and Lam, K.C. (2013), “Development of an optical FBG-based sensory system for monitoring structural integrity of water mains”, Proceedings of the 6th International Conference on Structural Health Monitoring of Intelligent Infrastructure, 9-11 December 2013, Hong Kong (CD-ROM).

  85. Li, X.F., Ni, Y.Q., and Wong, K.Y. (2013), “Structural health rating system-oriented 3D multi-scale finite element model of Stonecutters Bridge”, Proceedings of the 6th International Conference on Structural Health Monitoring of Intelligent Infrastructure, 9-11 December 2013, Hong Kong (CD-ROM).

  86. Liu, Y.C., Wu, T.H., Loh, C.H., and Ni, Y.Q. (2013), “Variation of modal parameters of Canton Tower under different earthquake excitations”, Proceedings of the 6th International Conference on Structural Health Monitoring of Intelligent Infrastructure, 9-11 December 2013, Hong Kong (CD-ROM).

  87. Wang, X., and Ni., Y.Q. (2013), “Comparison of statistical counting methods in SHM-based reliability assessment of bridges”, Proceedings of the 6th International Conference on Structural Health Monitoring of Intelligent Infrastructure, 9-11 December 2013, Hong Kong (CD-ROM).

  88. Xia, Y.X., Ni., Y.Q., and Wong, K.Y. (2013), “Development of a 3D bridge rating system incorporating structural health monitoring data”, Proceedings of the 6th International Conference on Structural Health Monitoring of Intelligent Infrastructure, 9-11 December 2013, Hong Kong (CD-ROM). (DOI)

  89. Ye, S.Q., and Ni., Y.Q. (2013), “Structural health monitoring of hanging gears for DC-3 aircraft on display at The Hong Kong Science Museum”, Proceedings of the 6th International Conference on Structural Health Monitoring of Intelligent Infrastructure, 9-11 December 2013, Hong Kong (CD-ROM).

  90. Ye, X.W., Fu, D.B., Ni., Y.Q., Wong, K.Y., and Jiang, S.F. (2013), “A comparative study of finite mixture modeling of stress spectrum using EM method and genetic algorithm”, Proceedings of the 6th International Conference on Structural Health Monitoring of Intelligent Infrastructure, 9-11 December 2013, Hong Kong (CD-ROM).

  91. Ye, X.W., Fu, D.B., Ni., Y.Q., Wong, K.Y., and Jiang, S.F. (2013), “Data-driven fatigue reliability assessment of a suspension bridge instrumented with long-term SHM system”, Proceedings of the 6th International Conference on Structural Health Monitoring of Intelligent Infrastructure, 9-11 December 2013, Hong Kong (CD-ROM).

  92. Ni, Y.Q., and Lin, K.C. (2013), “Reliability-based condition assessment of bridge deck using long-term monitoring data”, Structural Health Monitoring 2013: A Roadmap to Intelligent Structures, F.-K. Chang (ed.), DEStech Publications, Lancaster, Pennsylvania, USA, 2736-2743 (Proceedings of the 9th International Workshop on Structural Health Monitoring, 10-12 September 2013, Stanford, California, USA). (DOI)

  93. Xia, Y., Zhang, P., and Ni, Y.Q. (2013), “Displacement of a skyscraper using various types of field monitoring data”, Structural Health Monitoring 2013: A Roadmap to Intelligent Structures, F.-K. Chang (ed.), DEStech Publications, Lancaster, Pennsylvania, USA, 1679-1685 (Proceedings of the 9th International Workshop on Structural Health Monitoring, 10-12 September 2013, Stanford, California, USA). (DOI)

  94. Loh, C.H., Wu, T.H., and Ni, Y.Q. (2013), “Input force reconstruction using response measurements”, Structural Health Monitoring 2013: A Roadmap to Intelligent Structures, F.-K. Chang (ed.), DEStech Publications, Lancaster, Pennsylvania, USA, 1671-1678 (Proceedings of the 9th International Workshop on Structural Health Monitoring, 10-12 September 2013, Stanford, California, USA).

  95. Hong, M., Wang, Q., Su, Z., Cheng, L., and Ni, Y.Q. (2013), “In-situ guided-wave-based health monitoring for train bogie structures: technique development and application to Beijing-Shanghai High-speed Railway”, Structural Health Monitoring 2013: A Roadmap to Intelligent Structures, F.-K. Chang (ed.), DEStech Publications, Lancaster, Pennsylvania, USA, 948-955 (Proceedings of the 9th International Workshop on Structural Health Monitoring, 10-12 September 2013, Stanford, California, USA).

  96. Niu, Y., Fritzen, C.P., and Ni, Y.Q. (2013), “Online simultaneous reconstruction of wind load and structural responses for high-rise structures”, Structural Health Monitoring 2013: A Roadmap to Intelligent Structures, F.-K. Chang (ed.), DEStech Publications, Lancaster, Pennsylvania, USA, 327-334 (Proceedings of the 9th International Workshop on Structural Health Monitoring, 10-12 September 2013, Stanford, California, USA). (DOI)

  97. Yuan, Y., Wang, D., and Ni, Y.Q. (2013), “Minimum cost deployment in earthquake early warning system for high-speed railways”, Proceedings of the 2013 IEEE International Conference on Intelligent Rail Transportation, 30 August - 1 September 2013, Beijing, China (CD-ROM). (DOI)

  98. Ye, X.W., Fu, D.B., Ni, Y.Q., Wong, K.Y., and Jiang, S.F. (2013), “An improved model for fatigue reliability assessment of steel bridges: formulation and application”, Proceedings of the International Symposium on Innovation and Sustainability of Structures in Civil Engineering, 6-7 July 2013, Harbin, China (CD-ROM).

  99. Ni, Y.Q. (2013), “Structural health monitoring of large-scale structures: from diagnostics to prognostics”, Keynote speech, Proceedings of the 2013 SPIE Smart Structures/NDE Conference on Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems, 10-14 March 2013, San Diego, California, USA.

  100. Chen, Y., Ni, Y.Q., Ye, X.W., Yang, H.X., and Zhu, S. (2012), “Experimental evaluation of performance of fiber optic rotary joints for monitoring wind turbine blades”, Proceedings of the 1st International Conference on Performance-based and Life-cycle Structural Engineering, 5-7 December 2012, Hong Kong, 1995-2000.

  101. Ying, Z.G., Chen, H.F., and Ni, Y.Q. (2012), “Magnetorheological visco-elastomer and its application to suppressing micro-vibration of sandwich plates”, Proceedings of the 3rd International Conference on Smart Materials and Nanotechnology in Engineering, SPIE Vol. 8409, Paper No. 840918.

  102. Ni, Y.Q., and Wong, K.Y. (2012), “Integrating bridge structural health monitoring and condition-based maintenance management”, Proceedings of the 4th International Workshop on Civil Structural Health Monitoring, 6-8 November 2012, Berlin, Germany (CD-ROM). (DOI)

  103. Ni, Y.Q., and Ye, X.W. (2012), “Health monitoring of railway infrastructure: From foundations to rail tracks”, Proceedings of the International Symposium on Geotechnical Engineering for High-speed Transportation Infrastructure, 26-28 October 2012, Hangzhou, China (CD-ROM).

  104. Sajjadi Alehashem, S.M., and Ni, Y.Q. (2012), “Controllable magneto-rheological elastomer (MRE) for vibration suppression”, Proceedings of the 15th World Conference on Earthquake Engineering, 24-28 September 2012, Lisbon, Portugal (CD-ROM).

  105. Ni, Y.Q. (2012), “Health monitoring of long-span bridges and high-rise structures”, Proceedings of the 13th International Conference on Inspection, Appraisal, Repairs and Maintenance of Structures, Y.Z. Zhuang, and B.C. Chen (eds.), CI-Premier Pte Ltd., Singapore, 11-25 (27-29 July 2012, Wuyishan, China).

  106. Xia, H.W., Ni, Y.Q., and Ye, X.W. (2012), “Neutral-axis position based damage detection of bridge deck using strain measurement: formulation of a Kalman filter estimator”, Structural Health Monitoring 2012: Proceedings of the Sixth European Workshop on Structural Health Monitoring, C. Boller (ed.), German Society for Non-Destructive Testing, Berlin, Germany, 1212-1218 (Proceedings of the 6th European Workshop on Structural Health Monitoring, 3-6 July 2012, Dresden, Germany). (DOI)

  107. Ni, Y.Q., Xia, H.W., and Ye, X.W. (2012), “Neutral-axis position based damage detection of bridge deck using strain measurement: numerical and experimental verifications”, Structural Health Monitoring 2012: Proceedings of the Sixth European Workshop on Structural Health Monitoring, C. Boller (ed.), German Society for Non-Destructive Testing, Berlin, Germany, 1205-1211 (Proceedings of the 6th European Workshop on Structural Health Monitoring, 3-6 July 2012, Dresden, Germany). (DOI)

  108. Zhang, P., Xia, Y., and Ni, Y.Q. (2012), “Prediction of temperature induced deformation of a supertall structure using structural health monitoring data”, Structural Health Monitoring 2012: Proceedings of the Sixth European Workshop on Structural Health Monitoring, C. Boller (ed.), German Society for Non-Destructive Testing, Berlin, Germany, 879-885 (Proceedings of the 6th European Workshop on Structural Health Monitoring, 3-6 July 2012, Dresden, Germany).

  109. Ni, Y.Q., Li, W.R., and J.M. Ko (2012), “Monitoring of dynamic responses of a super-tall structure during earthquakes”, Proceedings of the International Conference on Earthquake Research Challenges in the 21st Century, 18-21 May 2012, Harbin, China (CD-ROM). 

  110. Chen, Y., Ni, Y.Q., Ye, X.W., Yang, H.X., and Zhu, S. (2012), “Structural health monitoring of wind turbine blade using fiber Bragg grating sensors and fiber optic rotary joint”, Proceedings of the 2012 SPIE Smart Structures/NDE Conference on Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems, 11-15 March 2012, San Diego, California, USA. (DOI)

  111. Ye, X.W., Guo, Z.G., Ni, Y.Q., and Chen, Y. (2012), “Experimental study on impact force identification of ship-bridge collision using smart piezoelectric sensors”, Proceedings of the 2012 SPIE Smart Structures/NDE Conference on Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems, 11-15 March 2012, San Diego, California, USA.

  112. Wang, D., and Ni, Y.Q. (2011), “Wireless sensor networks for earthquake early warning systems of railway lines”, Proceedings of the 1st International Workshop on High-Speed and Intercity Railways, Y.Q. Ni, and X.W. Ye (eds.), Springer-Verlag, Heidelberg, Germany, Vol. 2, 417-426 (Proceedings of the 1st International Workshop on High-Speed and Intercity Railways, 19-22 July 2011, Shenzhen and Hong Kong, China). (DOI)

  113. Song, S.D., Ni, Y.Q., and Ye, X.W. (2011), “An FBG-based sensor tailor-made for wind pressure monitoring of high-speed trains”, Proceedings of the 1st International Workshop on High-Speed and Intercity Railways, Y.Q. Ni, and X.W. Ye (eds.), Springer-Verlag, Heidelberg, Germany, Vol. 1, 155-162 (Proceedings of the 1st International Workshop on High-Speed and Intercity Railways, 19-22 July 2011, Shenzhen and Hong Kong, China).

  114. Xia, H.W., Ni, Y.Q., and Ye, X.W. (2011), “Kalman filter based estimation of neutral axis position of bridge deck under traffic loading”, Dynamics for Sustainable Engineering, S.S. Law, L. Cheng, Y. Xia, and Z. Su (eds.), The Hong Kong Polytechnic University, Hong Kong, 183-190 (Proceedings of the 14th Asia-Pacific Vibration Conference, 5-8 December 2011, Hong Kong).

  115. Lai, C.C., Au, H.Y., Chung, K.M., Chung, W.H., Liu, S.Y., Tam, H.Y., and Ni, Y.Q. (2011), “Optical sensor network for structural health monitoring of Canton Tower”, Dynamics for Sustainable Engineering, S.S. Law, L. Cheng, Y. Xia, and Z. Su (eds.), The Hong Kong Polytechnic University, Hong Kong, 147-153 (Proceedings of the 14th Asia-Pacific Vibration Conference, 5-8 December 2011, Hong Kong). (DOI)

  116. S.Q. Ye, and Ni, Y.Q. (2011), “Sensor placement strategy for structural damage detection from modal strain energy change”, Dynamics for Sustainable Engineering, S.S. Law, L. Cheng, Y. Xia, and Z. Su (eds.), The Hong Kong Polytechnic University, Hong Kong, 141-146 (Proceedings of the 14th Asia-Pacific Vibration Conference, 5-8 December 2011, Hong Kong).

  117. Xu, Y.L., Ding, X.L., Cao, J.N., Tam, H.Y., Ni, Y.Q., Law, S.S., Xia, Y. and Zhu, S. (2011), “Performance-based health monitoring of large civil structures”, Dynamics for Sustainable Engineering, S.S. Law, L. Cheng, Y. Xia, and Z. Su (eds.), The Hong Kong Polytechnic University, Hong Kong, 69-83 (Proceedings of the 14th Asia-Pacific Vibration Conference, 5-8 December 2011, Hong Kong).

  118. Zhang, P., Xia, Y., Ni, Y.Q., and Liao, W.Y. (2011), “Temperature distribution of Guangzhou New TV Tower based on structural health monitoring data”, Innovation and Sustainability of Structures, J. Li, Y. Lei, Z. Wu, and R. Liang (eds.), Southeast University Press, Nanjing, China, 455-461 (Proceedings of the International Symposium on Innovation and Sustainability of Structures in Civil Engineering, 28-30 October 2011, Xiamen, China).

  119. Ni, Y.Q., Liao, W.Y., Xia, Y., and Ko, J.M. (2011), “Structural health monitoring of supertall structures: an engineering paradigm and technology showcase”, Innovation and Sustainability of Structures, J. Li, Y. Lei, Z. Wu, and R. Liang (eds.), Southeast University Press, Nanjing, China, 131-142 (Proceedings of the International Symposium on Innovation and Sustainability of Structures in Civil Engineering, 28-30 October 2011, Xiamen, China). (DOI)

  120. Ye, X.W., and Ni, Y.Q. (2011), “Vibration-induced probabilistic fatigue life assessment of a suspension bridge carrying both railway and highway traffic”, Advances in Environmental Vibration, W. Zhai, H. Takemiya, G. De Roeck, and E. Tutumluer (eds.), Science Press, Beijing, 386-396 (Proceedings of the 5th International Symposium on Environmental Vibration, 20-22 October 2011, Chengdu, China).

  121. Lin, K.C., Ni, Y.Q., Ye, X.W., and Wong, K.Y. (2011), “Structural condition rating of bridges using LRFR method and hybrid Bayesian network”, Proceedings of the 2011 World Congress on Advances in Structural Engineering and Mechanics, 18-22 September 2011, Seoul, Korea, 1077-1086.

  122. Ni, Y.Q., and Sajjadi Alehashem, S.M. (2011), “Experimental evaluation of dynamic characteristics of an isotropic magneto-rheological elastomer (MRE) in shear mode”, Proceedings of the 2011 World Congress on Advances in Structural Engineering and Mechanics, 18-22 September 2011, Seoul, Korea, 1047-1060.

  123. Ni, Y.Q., Xia, Y., Lin, W., and Ko, J.M. (2011), “SHM benchmark for high-rise structures: description of host structure and measurement data”, Structural Health Monitoring 2011: Condition-based Maintenance and Intelligent Structures, F.-K. Chang (ed.), DEStech Publications, Lancaster, Pennsylvania, USA, 2406-2413 (Proceedings of the 8th International Workshop on Structural Health Monitoring, 13-15 September 2011, Stanford, California, USA).

  124. Loh, C.H., Liu, Y.C., and Ni, Y.Q. (2011), “SSA-based stochastic subspace identification of structures from output-only vibration measurements”, Structural Health Monitoring 2011: Condition-based Maintenance and Intelligent Structures, F.-K. Chang (ed.), DEStech Publications, Lancaster, Pennsylvania, USA, 2398-2405 (Proceedings of the 8th International Workshop on Structural Health Monitoring, 13-15 September 2011, Stanford, California, USA). (DOI)

  125. Ye, S.Q., and Ni, Y.Q. (2011), “Information entropy-based algorithm of sensor placement optimization for structural damage detection”, Structural Health Monitoring 2011: Condition-based Maintenance and Intelligent Structures, F.-K. Chang (ed.), DEStech Publications, Lancaster, Pennsylvania, USA, 2390-2397 (Proceedings of the 8th International Workshop on Structural Health Monitoring, 13-15 September 2011, Stanford, California, USA).

  126. Ni, Y.Q., and Chen, Z.H. (2011), “Vibration control of cable-stayed bridges”, Proceedings of the 2011 International Forum on Bridge Engineering, 8-9 September 2011, Taipei, Taiwan, 225-248.

  127. Lin, K.C., Ye, X.W., Ni, Y.Q., and Wong, K.Y. (2011), “Systematic categorization of structural components in Stonecutters Bridge”, Proceedings of the 5th Cross-Strait Conference on Structural and Geotechnical Engineering, 13-15 July 2011, Hong Kong, Vol. 2, 649-654.

  128. Duan, Y.F., Ni, Y.Q., and Ko, J.M. (2011), “Multi-located tuned mass dampers for vibration mitigation of tower-like structures with whipping effect”, Proceedings of the 5th Cross-Strait Conference on Structural and Geotechnical Engineering, 13-15 July 2011, Hong Kong, Vol. 2, 745-755. (DOI)

  129. Xu, F., Ni, Y.Q., and Ye, X.W. (2011), “Development of a digital camera system for monitoring of structural displacement”, Proceedings of the 5th Cross-Strait Conference on Structural and Geotechnical Engineering, 13-15 July 2011, Hong Kong, Vol. 2, 832-837. (DOI)

  130. Guo, Y.L., Ni, Y.Q., and Kareem, A. (2011), “Performance evaluation of the Guangzhou New TV Tower under winds based on full-scale monitoring data”, Proceedings of the 13th International Conference on Wind Engineering, 10-15 July 2011, Amsterdam, The Netherlands (CD-ROM).

  131. Ni, Y.Q. (2011), “Sensing solutions for assessing and monitoring mega-structures”, Invited Speech, Proceedings of the International Workshop on Structural Health Monitoring and Damage Assessment, 9-10 June 2011, Taipei, Taiwan, III1-III15. (DOI)

  132. Sajjadi Alehashem, S.M., Keyhani, A., and Ni, Y.Q. (2011), “Hydro-pneumatic semi-active resettable device by using MR-fluid (MR-HSRD) for vibration suppression”, Proceedings of the 6th International Conference of Seismology and Earthquake Engineering, 16-18 May 2011, Tehran, Iran (CD-ROM).

  133. Tam, H.Y., Au, H.Y., Chung, K.M., Liao, W.Y., Chung, W.H., Liu, S.Y., Lai, C.C., Ni, Y.Q., and Csipkes, A. (2011), “Distribution optical sensor system on the 610-m Guangzhou New TV Tower”, Proceedings of the 2011 Conference on Optical Fiber Communication, 6-10 March 2011, Los Angeles, California, USA (CD-ROM). (DOI)

  134. Zhou, H.F., Liu, J.L., Ni, Y.Q., and Zhu, D.P. (2011), “Field investigation of a vibration monitoring wireless sensor network on a huge cantilever structure”, Proceedings of the 2011 SPIE Smart Structures/NDE Conference on Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems, 6-10 March 2011, San Diego, California, USA (CD-ROM).

  135. Ni, Y.Q., Wai, T.T., and Wong, K.Y. (2010), “Long-distance remote measurement of static and dynamic displacement for large-scale structures using a vision inspection system”, Proceedings of the 3rd Asia-Pacific Workshop on Structural Health Monitoring, 30 November - 2 December 2010, Tokyo, Japan (CD-ROM).

  136. Guo, Y.L., Ni, Y.Q., and Zhou, H.F. (2010), “Ship-collided bridge condition assessment using SHM data and HHT-based techniques”, Life-Cycle of Civil Engineering Systems, S.-S. Chen, D.M. Frangopol, and A.H.-.S. Ang (eds.), National Taiwan University of Science and Technology, Taipei, Taiwan, 164-169 (CD-ROM) (Proceedings of the 2nd International Symposium on Life-Cycle Civil Engineering, 27-31 October 2010, Taipei, Taiwan).

  137. Sajjadi, S.M., Ni, Y.Q., and Keyhani, A. (2010), “Fabrication and experiment of a semi-active resettable energy dissipating device using MR fluid”, Proceedings of the 5th World Conference on Structural Control and Monitoring, 12-14 July 2010, Tokyo, Japan (CD-ROM).

  138. Lin, W., Ni, Y.Q., Xia, Y., and Chen, W.H. (2010), “Field measurement data and a reduced-order finite element model for Task I of the SHM benchmark problem for high-rise structures”, Proceedings of the 5th World Conference on Structural Control and Monitoring, 12-14 July 2010, Tokyo, Japan (CD-ROM). (DOI)

  139. Zhou, H.F., Ni, Y.Q., Guo, Y.L., and Ko, J.M. (2010), “Performance assessment of Jiangyin Bridge using long-term structural health monitoring data”, Bridge Maintenance, Safety, Management and Life-Cycle Optimization, D.M. Frangopol, R. Sause, and C.S. Kusko (eds.), Taylor & Francis, London, UK, 2962-2971 (CD-ROM) (Proceedings of the 5th International Conference on Bridge Maintenance, Safety and Management, 11-15 July 2010, Philadelphia, Pennsylvanian, USA).

  140. Ye, X.W., Ni, Y.Q., Ko, J.M., and Wong, K.Y. (2010), “A method for stress concentration factor determination of welded steel bridge T-joints under moving load”, Bridge Maintenance, Safety, Management and Life-Cycle Optimization, D.M. Frangopol, R. Sause, and C.S. Kusko (eds.), Taylor & Francis, London, UK, 2670-2676 (CD-ROM) (Proceedings of the 5th International Conference on Bridge Maintenance, Safety and Management, 11-15 July 2010, Philadelphia, Pennsylvanian, USA). (DOI)

  141. Shao, X.P., Guo, B.L., and Ni, Y.Q. (2010), “Instrumentation for reinforced concrete durability monitoring of Qingdao Bay Bridge”, Bridge Maintenance, Safety, Management and Life-Cycle Optimization, D.M. Frangopol, R. Sause, and C.S. Kusko (eds.), Taylor & Francis, London, UK, 839-844 (CD-ROM) (Proceedings of the 5th International Conference on Bridge Maintenance, Safety and Management, 11-15 July 2010, Philadelphia, Pennsylvanian, USA). (DOI)

  142. Ni, Y.Q., Xia, H.W., Ko, J.M., and Wong, K.Y. (2010), “Condition assessment of bridge deck truss using in-service monitoring data of strain”, Bridge Maintenance, Safety, Management and Life-Cycle Optimization, D.M. Frangopol, R. Sause, and C.S. Kusko (eds.), Taylor & Francis, London, UK, 799-805 (CD-ROM) (Proceedings of the 5th International Conference on Bridge Maintenance, Safety and Management, 11-15 July 2010, Philadelphia, Pennsylvanian, USA).

  143. Xia, H.W., Ni, Y.Q., Ko, J.M., and Wong, K.Y. (2010), “Measurement fusion for component estimation of long-term monitoring signal of in-service strain”, Proceedings of the 5th European Workshop on Structural Health Monitoring, F. Casciati and M. Giordano (eds.), DEStech Publications, Lancaster, Pennsylvania, USA, 566-571 (29 June – 2 July 2010, Sorrento, Naples, Italy).

  144. Liao, W.Y., Chen, W.H., Ni, Y.Q., and Xia, Y. (2010), “Development of a vision-based real-time displacement measurement system for Guangzhou New TV Tower”, Proceedings of the 5th European Workshop on Structural Health Monitoring, F. Casciati and M. Giordano (eds.), DEStech Publications, Lancaster, Pennsylvania, USA, 450-455 (29 June – 2 July 2010, Sorrento, Naples, Italy). (DOI)

  145. Ni, Y.Q. (2010), “Structural health monitoring for civil infrastructure systems: from research to application”, Proceedings of the 5th European Workshop on Structural Health Monitoring, F. Casciati and M. Giordano (eds.), DEStech Publications, Lancaster, Pennsylvania, USA, 6-17 (29 June – 2 July 2010, Sorrento, Naples, Italy). (DOI)

  146. Xia, H.W., Ni, Y.Q., Ko, J.M., and Wong, K.Y. (2010), “Wavelet-based multi-resolution decomposition of long-term monitoring signal of in-service strain”, Proceedings of the 2nd International Postgraduate Conference on Infrastructure and Environment, 1-2 June 2010, Hong Kong, Vol.2, 278-285.

  147. Ni, Y.Q., and Zhou, H.F. (2010), “Guangzhou New TV Tower: integrated structural health monitoring and vibration control”, Proceedings of the 2010 Structures Congress of American Society of Civil Engineers, 12-15 May 2010, Orlando, Florida, USA, 3155-3164 (CD-ROM).

  148. Li, B., Wang, D., Wang, F., and Ni, Y.Q. (2010), “High quality sensor placement for SHM systems: refocusing on application demands”, Proceedings of IEEE INFOCOM 2010: the 29th Conference on Computer Communications, 15-19 March 2010, San Diego, CA, USA (CD-ROM). (DOI)

  149. Li, B., Wang, D., and Ni, Y.Q. (2010), “Demo: An Imote2 compatible high fidelity sensing module for SHM sensor networks”, Proceedings of IEEE INFOCOM 2010: the 29th Conference on Computer Communications, 15-19 March 2010, San Diego, CA, USA (CD-ROM).

  150. Lu, Z.R., Huang, M., Chen, W.H., Liu, J.K., and Ni, Y.Q. (2010), “Assessment of local damage in box-girder bridges using measured dynamic responses by passing vehicle.” Proceedings of the IEEE – Prognostics & System Health Management Conference 2010, 12-14 January 2010, Macau (CD-ROM). (DOI)

bottom of page